EUVIMEDEUVIMED entdecken
Crossref

Er:YAG laser debonding of zirconia and lithium disilicate restorations

Sama Suliman, Taiseer A Sulaiman, Janina Golob Deeb, Awab Abdulmajeed, Aous Abdulmajeed, Timo Närhi

The Journal of Prosthetic Dentistry · 2024

DOI: 10.1016/j.prosdent.2023.10.016 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2024. Verfasst von Sama Suliman und 5 weiteren Autor:innen. Beteiligte Einrichtung: Doctoral student, Department of Prosthetic Dentistry and Stomatognathic Physiology, Institute of Dentistry, University of Turku, Turku, Finland; and …. Hauptthemen laut MEDLINE: Lasers, Solid-State, Yttrium. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 33 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

STATEMENT OF PROBLEM: Yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) restorations of different formulations are being used increasingly in monolithic form for a range of clinical applications. Using rotary instruments to remove such restorations for any purpose is challenging, but they can be removed conservatively with erbium lasers. However, studies on how a laser penetrates different zirconias to break the cement bond between the tooth surface and the zirconia are lacking. PURPOSE: The purpose of this in vitro study was to evaluate and compare the time required for an erbium-doped yttrium-aluminum-garnet (Er:YAG) laser to remove different types of zirconia and lithium disilicate crowns. MATERIAL AND METHODS: Forty extracted premolar teeth were prepared, scanned, designed, and milled to fabricate 40 computer-aided design and computer-aided manufacturing (CAD-CAM) crowns, which were assigned to 4 groups (n=10): 3 mol% Y-TZP, 4 mol% Y-TZP, 5 mol% Y-TZP, and lithium disilicate as a control. All crowns were bonded to the teeth with a self-adhesive resin cement (Panavia SA Cement Universal). Each specimen was irradiated with an Er:YAG laser with the following parameters: 300 mJ, 15 Hz, 5.0 W, and a 50-microsecond pulse duration (supershort pulse mode). The irradiation time required for crowns to be retrieved successfully was recorded for each specimen. Data were statistically analyzed using analysis of variance and the Tukey honestly significant difference post hoc test (α=.05). The intaglio surfaces of the restorations were analyzed using scanning electron microscopy (SEM). RESULTS: The mean ±standard deviation times in minutes needed for crown debonding were 12.46 ±4.17 for the 3 mol% Y-TZP group, 10.30 ±3.33 for the 4 mol% Y-TZP group, 4.03 ±1.62 for the 5 mol% Y-TZP group, and 2.08 ±0.92 for the lithium disilicate group. A statistically significant difference (P

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Lasers, Solid-StateYttriumErbiumDental PorcelainCrownsZirconiumCeramicsResin CementsDental CementsMaterials Testing

Substanzen

lithia disilicateyttriazirconium oxideErbiumDental Porcelainyttria stabilized tetragonal zirconiaZirconiumResin CementsDental CementsYttrium

Autor:innen und Institutionen

  • Doctoral student, Department of Prosthetic Dentistry and Stomatognathic Physiology, Institute of Dentistry, University of Turku, Turku, Finland; and Lecturer, Department of Preventive and Restorative Dentistry, College…
  • Associate Professor, Division of Comprehensive Oral Health, Adams School of Dentistry, University of North Carolina at Chapel Hill, NC. Electronic address: taiseer_sulaiman@unc.edu.
  • Professor, Department of Periodontics, School of Dentistry, Virginia Commonwealth University, Richmond, Virginia.
  • Assistant Professor, Department of General Practice, School of Dentistry, Virginia Commonwealth University, Richmond, Virginia.
  • Associate Professor, Department of General Practice, School of Dentistry, Virginia Commonwealth University, Richmond, Virginia.
  • Professor, Department of Prosthetic Dentistry and Stomatognathic Physiology, Institute of Dentistry, University of Turku, Turku, Finland.

Zitieren

APA

Suliman, S., Sulaiman, T. A., Deeb, J. G., Abdulmajeed, A., Abdulmajeed, A., & Närhi, T. (2024). Er:YAG laser debonding of zirconia and lithium disilicate restorations. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2023.10.016

Vancouver

Suliman S, Sulaiman TA, Deeb JG, Abdulmajeed A, Abdulmajeed A, Närhi T. Er:YAG laser debonding of zirconia and lithium disilicate restorations. The Journal of Prosthetic Dentistry. 2024. doi:10.1016/j.prosdent.2023.10.016

BibTeX
@article{Suliman2024,
  author = {Suliman, Sama and Sulaiman, Taiseer A and Deeb, Janina Golob and Abdulmajeed, Awab and Abdulmajeed, Aous and Närhi, Timo},
  title = {Er:YAG laser debonding of zirconia and lithium disilicate restorations},
  journal = {The Journal of Prosthetic Dentistry},
  year = {2024},
  doi = {10.1016/j.prosdent.2023.10.016}
}
Kostenlos starten →