EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of high-temperature preconditioning on Li plating during low-temperature cycling of the COTS LG Chem HG2 cell

Lukas Lehnert, Keith B. Chin, Frederick C. Krause, John P. Ruiz, Simon Hein, John Bescup, Gil Garteiz, Arnulf Latz, Erik J. Brandon, Birger Horstmann

Journal of Power Sources Advances · 2026-08 · 40 · 100210

DOI: 10.1016/j.powera.2026.100210 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Power Sources Advances, 2026-08. Verfasst von Lukas Lehnert und 9 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Aerospace Center, Ministerium für Wirtschaft, Arbeit und Wohnungsbau Baden-Württemberg, Deutsche Forschungsgemeinschaft.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Commercial off-the-shelf~(COTS) Li ion cells offer an attractive and rechargeable power source for spacecraft applications. However, since these cells are typically designed for charging above 0\,\textdegree C, challenging sub-zero temperatures could inflict irreversible degradation and safety hazards during in-flight operation. To address these challenges, this work explores strategies affecting their low-temperature performance. Specifically, we investigate the Li plating behavior of the COTS~LG~Chem~18650~HG2 cell during galvanostatic cycling at $-20\,$\textdegree C and its dependence on prior high-temperature preconditioning protocols, involving either two-week galvanostatic cycling or storage at 30\,\textdegree C, as well as a reference case without preconditioning, i.e., direct cycling at $-20\,$\textdegree C. Experimental cycling tests reveal distinct differences in Li metal deposition between cells subjected to these conditions. To identify the origin of these discrepancies, we combine computed tomography of the electrode microstructure with three-dimensional, spatially resolved cell modeling and analyze the simulation results.

Förderung

  • German Aerospace Center
  • Ministerium für Wirtschaft, Arbeit und Wohnungsbau Baden-Württemberg
  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Lehnert, L., Chin, K. B., Krause, F. C., Ruiz, J. P., Hein, S., Bescup, J., Garteiz, G., Latz, A., Brandon, E. J., & Horstmann, B. (2026). Effects of high-temperature preconditioning on Li plating during low-temperature cycling of the COTS LG Chem HG2 cell. Journal of Power Sources Advances, 40, 100210. https://doi.org/10.1016/j.powera.2026.100210

Vancouver

Lehnert L, Chin KB, Krause FC, Ruiz JP, Hein S, Bescup J, et al. Effects of high-temperature preconditioning on Li plating during low-temperature cycling of the COTS LG Chem HG2 cell. Journal of Power Sources Advances. 2026;40:100210. doi:10.1016/j.powera.2026.100210

BibTeX
@article{Lehnert2026,
  author = {Lehnert, Lukas and Chin, Keith B. and Krause, Frederick C. and Ruiz, John P. and Hein, Simon and Bescup, John and Garteiz, Gil and Latz, Arnulf and Brandon, Erik J. and Horstmann, Birger},
  title = {Effects of high-temperature preconditioning on Li plating during low-temperature cycling of the COTS LG Chem HG2 cell},
  journal = {Journal of Power Sources Advances},
  year = {2026},
  volume = {40},
  pages = {100210},
  doi = {10.1016/j.powera.2026.100210}
}
Kostenlos starten →