EUVIMEDEUVIMED entdecken
Crossref

Lithium-Plating Behavior in Commercial 4680 Cylindrical Cells during Low-Temperature Charging

Yasaman AbdiSobbouhi, Qusai Alahmad, Todd A. Kingston, Vitaliy R. Yurkiv

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (1) · 95-95

DOI: 10.1149/ma2026-01195mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Yasaman AbdiSobbouhi und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium plating is a critical degradation mechanism in lithium-ion batteries (LIBs) during low-temperature charging, where reduced ionic mobility and slower intercalation kinetics promote metallic lithium deposition on the graphite anode. However, plating behavior in large-format cells such as the commercial 4680 (46 mm diameter, 80 mm height) remains under-characterized. In this work, we investigate lithium plating in 4680 24 Ah cylindrical cells at sub-zero temperatures of −20 °C, −10 °C, and 0 °C, using 22 °C as a baseline. During testing, surface temperatures were monitored using FLIR infrared camera and a thermocouple attached to the battery surface. Cells were charged from 2.7 V to 4.2 V under a constant-current, constant-voltage (CCCV) protocol at C-rates of 0.05C, 0.5C, and 1C, with electrochemical impedance spectroscopy (EIS) performed at designated voltages (state of charge, SOC). EIS results show clear signatures of lithium plating emerging at low temperatures and high charging rates. As temperature decreases from 0 °C to −20 °C, the mid-frequency impedance (1–10 Hz range) exhibits pronounced features indicative of Li plating, with the magnitude of these features increasing at both mid-SOC and 100% SOC conditions. Raising the charge rate to 1C further intensifies the plating-related impedance response and shifts it toward the upper end of the frequency range, reflecting a greater tendency for Li metal deposition during fast charging in cold conditions. Distribution of relaxation times (DRT) analysis of the EIS spectra isolates a distinct peak associated with plating kinetics, separating it from overlapping processes and confirming the presence of a plating process under these conditions. To correlate the impedance signatures with internal cell conditions, a three-dimensional electro-thermal model of the 4680 cell was developed in COMSOL Multiphysics [1]. The model simulates coupled heat generation and electrochemical behavior during charge-discharge, revealing substantial internal temperature gradients and anode overpotentials at sub-zero ambient temperatures. Specifically, at −20 °C and high current, the anode potential drops to levels that thermodynamically favor Li metal deposition. These modeling insights align with the EIS/DRT observations, linking the appearance of mid-frequency plating features to the actual onset of lithium plating within the cell. Overall, the combination of experimental diagnostics, DRT analysis, and physics-based electro-thermal modeling provides a comprehensive understanding of lithium plating in 4680 cells at low temperatures and offers guidance for safer charging strategies in cold-climate electric vehicle operation. Acknowledgment Authors gratefully acknowledge financial support from the Department of War (DoW) Office of Naval Research (ONR) and Air Force Office of Scientific Research through the Defense Established Program to Stimulate Competitive Research (DEPSCoR) under award number FA9550-24-1-0164. References [1] B. R. Das Goswami, Y. Abdisobbouhi, H. Du, F. Mashayek, T. A. Kingston, and V. Yurkiv, “Advancing battery safety: Integrating multiphysics and machine learning for thermal runaway prediction in lithium-ion battery module,” J Power Sources , vol. 614, Sep. 2024, doi: 10.1016/j.jpowsour.2024.235015.

Zitieren

APA

AbdiSobbouhi, Y., Alahmad, Q., Kingston, T. A., & Yurkiv, V. R. (2026). Lithium-Plating Behavior in Commercial 4680 Cylindrical Cells during Low-Temperature Charging. ECS Meeting Abstracts, MA2026-01(1), 95-95. https://doi.org/10.1149/ma2026-01195mtgabs

Vancouver

AbdiSobbouhi Y, Alahmad Q, Kingston TA, Yurkiv VR. Lithium-Plating Behavior in Commercial 4680 Cylindrical Cells during Low-Temperature Charging. ECS Meeting Abstracts. 2026;MA2026-01(1):95-95. doi:10.1149/ma2026-01195mtgabs

BibTeX
@article{AbdiSobbouhi2026,
  author = {AbdiSobbouhi, Yasaman and Alahmad, Qusai and Kingston, Todd A. and Yurkiv, Vitaliy R.},
  title = {Lithium-Plating Behavior in Commercial 4680 Cylindrical Cells during Low-Temperature Charging},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {1},
  pages = {95--95},
  doi = {10.1149/ma2026-01195mtgabs}
}
Kostenlos starten →