3D-printed PCL scaffolds with anatomy-inspired bionic stratified structures for the treatment of growth plate injuries
Materials Today Bio · 2023-12 · 23 · 100833
DOI: 10.1016/j.mtbio.2023.100833 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Today Bio, 2023-12. Verfasst von Xianggang Wang und 9 weiteren Autor:innen. Beteiligte Einrichtung: Orthopaedic Medical Center, The Second Hospital of Jilin University, Changchun, 130041, PR China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: China Postdoctoral Science Foundation, Jilin University, Jilin Provincial Department of Health.
Abstract (Originalsprache)
The growth plate is a cartilaginous tissue with three distinct zones. Resident chondrocytes are highly organized in a columnar structure, which is critical for the longitudinal growth of immature long bones. Once injured, the growth plate may potentially be replaced by bony bar formation and, consequently, cause limb abnormalities in children. It is well-known that the essential step in growth plate repair is the remolding of the organized structure of chondrocytes. To achieve this, we prepared an anatomy-inspired bionic Poly(ε-caprolactone) (PCL) scaffold with a stratified structure using three-dimensional (3D) printing technology. The bionic scaffold is engineered by surface modification of NaOH and collagen Ⅰ (COL Ⅰ) to promote cell adhesion. Moreover, chondrocytes and bone marrow mesenchymal stem cells (BMSCs) are loaded in the most suitable ratio of 1:3 for growth plate reconstruction. Based on the anatomical structure of the growth plate, the bionic scaffold is designed to have three regions, which are the small-, medium-, and large-pore-size regions. These pore sizes are used to induce BMSCs to differentiate into similar structures such as the growth plate. Remarkably, the X-ray and histological results also demonstrate that the cell-loaded stratified scaffold can successfully rebuild the structure of the growth plate and reduce limb abnormalities, including limb length discrepancies and angular deformities in vivo. This study provides a potential method of preparing a bioinspired stratified scaffold for the treatment of growth plate injuries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Orthopaedic Medical Center, The Second Hospital of Jilin University, Changchun, 130041, PR China.
- Orthopaedic Research Institute of Jilin Province, Changchun, 130041, PR China.
- Department of Plastic and Reconstructive Surgery, The First Hospital of Jilin University, Changchun, 130021, PR China.
Förderung
- China Postdoctoral Science Foundation
- Jilin University
- Jilin Provincial Department of Health
- Foundation for Innovative Research Groups of the National Natural Science Foundation of China
- National Natural Science Foundation of China
Zitieren
APA
Wang, X., Li, Z., Liu, J., Wang, C., Bai, H., Zhu, X., Wang, H., Wang, Z., Liu, H., & Wang, J. (2023). 3D-printed PCL scaffolds with anatomy-inspired bionic stratified structures for the treatment of growth plate injuries. Materials Today Bio, 23, 100833. https://doi.org/10.1016/j.mtbio.2023.100833
Vancouver
Wang X, Li Z, Liu J, Wang C, Bai H, Zhu X, et al. 3D-printed PCL scaffolds with anatomy-inspired bionic stratified structures for the treatment of growth plate injuries. Materials Today Bio. 2023;23:100833. doi:10.1016/j.mtbio.2023.100833
BibTeX
@article{Wang2023,
author = {Wang, Xianggang and Li, Zuhao and Liu, Jiaqi and Wang, Chenyu and Bai, Haotian and Zhu, Xiujie and Wang, Hui and Wang, Zhonghan and Liu, He and Wang, Jincheng},
title = {3D-printed PCL scaffolds with anatomy-inspired bionic stratified structures for the treatment of growth plate injuries},
journal = {Materials Today Bio},
year = {2023},
volume = {23},
pages = {100833},
doi = {10.1016/j.mtbio.2023.100833}
}
EUVIMED