Integration of porous graphene and 3D-printed piezopolymer for flexible ultrasound transducers
Materials & Design · 2025-12 · 260 · 115205
DOI: 10.1016/j.matdes.2025.115205 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials & Design, 2025-12. Verfasst von Shirin Movaghgharnezhad und 6 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Medical Technology Enterprise Consortium.
Abstract (Originalsprache)
Ultrasound technology is crucial in diagnostic imaging, making it widely used in medical applications. However, traditional ultrasound transducers face limitations in flexibility and ease of fabrication, leading to the exploration of thin-film and flexible piezoelectric materials. Here, we present a novel approach that combines laser graphitization with 3D printing to integrate flexible laser-induced porous graphene (LIG) with poly(vinylidene fluoride-trifluoroethylene) (PVDF-TrFE), resulting in the development of flexible LIG/PVDF-TrFE ultrasound patches. The thickness of PVDF-TrFE is adjusted to tune the central frequency of the ultrasound transducer, allowing customization within a range of 10 to 28 MHz. LIG-based ultrasound transducer demonstrates a high signal amplitude of 6.72 V and a signal-to-noise ratio (SNR) of 433, along with a -6 dB bandwidth of 8.86 MHz (37%). The LIG-based transducer exhibits higher acoustic performance compared to the smooth silver-based transducer. A high-quality two-dimensional ultrasound image, including a B-mode image of a cyst phantom, demonstrates the transducer's imaging capabilities. The patterning of LIG-based electrodes facilitates the desired sensor configuration, demonstrating the suitability of our novel technique for producing flexible transducer arrays without dicing and cutting. The materials cost of our LIG/PVDF-TrFE transducer is under $5 per unit, making it a low-cost solution for ultrasound patches.
Förderung
- Medical Technology Enterprise Consortium
Zitieren
APA
Movaghgharnezhad, S., Ansari, E., Baker, C. A., Bashatah, A. A., Valenzuela, D. A., Kang, P., & Chitnis, P. V. (2025). Integration of porous graphene and 3D-printed piezopolymer for flexible ultrasound transducers. Materials & Design, 260, 115205. https://doi.org/10.1016/j.matdes.2025.115205
Vancouver
Movaghgharnezhad S, Ansari E, Baker CA, Bashatah AA, Valenzuela DA, Kang P, et al. Integration of porous graphene and 3D-printed piezopolymer for flexible ultrasound transducers. Materials & Design. 2025;260:115205. doi:10.1016/j.matdes.2025.115205
BibTeX
@article{Movaghgharnezhad2025,
author = {Movaghgharnezhad, Shirin and Ansari, Ehsan and Baker, Clayton A. and Bashatah, Ahmed A and Valenzuela, Dulcce A. and Kang, Pilgyu and Chitnis, Parag V.},
title = {Integration of porous graphene and 3D-printed piezopolymer for flexible ultrasound transducers},
journal = {Materials & Design},
year = {2025},
volume = {260},
pages = {115205},
doi = {10.1016/j.matdes.2025.115205}
}
EUVIMED