EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

3D‐Printed Electrostatic Microactuators for Flexible Microsystems

Sukjun Kim, Regan Kubicek, Sarah Bergbreiter

Advanced Functional Materials · 2023-11 · 33 (47)

DOI: 10.1002/adfm.202304991 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 20.07.2023. Verfasst von Sukjun Kim und 2 weiteren Autor:innen. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Science Foundation, Air Force Office of Scientific Research, Carnegie Mellon University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Developing small‐scale, lightweight, and flexible devices with integrated microactuators is one of the critical challenges in wearable haptic devices, soft robotics, and microrobotics. In this study, a novel fabrication process that leverages the benefits of 3D printing with two‐photon polymerization and flexible printed circuit boards (FPCBs) is presented. This method enables flexible microsystems with 3D‐printed electrostatic microactuators, which are demonstrated in a flexible integrated micromirror array and a legged microrobot with a mass of 4 mg. 3D electrostatic actuators on FPCBs are robust enough to actuate the micromirrors while the device is deformed, and they are easily integrated with off‐the‐shelf electronics. The crawling robot is one of the lightest legged microrobots actuated without external fields, and the legs actuated with 3D electrostatic actuators enable a locomotion speed of 0.27 body length per second. The proposed fabrication framework opens up a pathway toward a variety of highly integrated flexible microsystems.

Förderung

  • National Science Foundation
  • Air Force Office of Scientific Research
  • Carnegie Mellon University

Zitieren

APA

Kim, S., Kubicek, R., & Bergbreiter, S. (2023). 3D‐Printed Electrostatic Microactuators for Flexible Microsystems. Advanced Functional Materials, 33(47). https://doi.org/10.1002/adfm.202304991

Vancouver

Kim S, Kubicek R, Bergbreiter S. 3D‐Printed Electrostatic Microactuators for Flexible Microsystems. Advanced Functional Materials. 2023;33(47). doi:10.1002/adfm.202304991

BibTeX
@article{Kim2023,
  author = {Kim, Sukjun and Kubicek, Regan and Bergbreiter, Sarah},
  title = {3D‐Printed Electrostatic Microactuators for Flexible Microsystems},
  journal = {Advanced Functional Materials},
  year = {2023},
  volume = {33},
  number = {47},
  doi = {10.1002/adfm.202304991}
}
Kostenlos starten →