Comparative performance evaluation of microarchitected lattices processed via SLS, MJ, and DLP 3D printing methods: Experimental investigation and modelling
Journal of Materials Research and Technology · 2023-09 · 26 · 7182-7198
DOI: 10.1016/j.jmrt.2023.09.061 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Materials Research and Technology, 2023-09. Verfasst von Johannes Schneider und 1 weiteren Autor:innen. Die Arbeit wurde bisher 57-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Glasgow, EPSRC.
Abstract (Originalsprache)
Additively manufactured mechanical metamaterials are gaining prominence in light-weight energy-absorption applications due to their exceptional mass-specific properties. Herein, we examine the energy absorption characteristics of micro-architected truss-, shell-and plate-lattice structures, namely, Octet, Kelvin, Gyroid, SC, BCC and FCC over a range of relative densities under quasi-static compression via both experiments and finite element analysis (FEA). Employing different 3D printing methods, namely, Digital Light Processing, Selective Laser Sintering and Material Jetting, the lattices were fabricated using PlasGray ™ (photo-resin based plastic), PA12 (Nylon) and VeroWhite (photo-resin based rigid plastic) respectively. Our results indicate that the SC lattice structure outperforms in terms of stiffness and strength, while the Gyroid lattice outperforms in terms of energy absorption efficiency ( h ). At lower relative densities ( < 0.3), h reaches up to 61% for the Gyroid lattices made of PlasGray, while only at high relative densities the Octet truss lat-tices compete with the Gyroid lattices. For Gyroid lattices made of PA12 with a relative density of 0.23, an energy absorption efficiency of 68% was observed. Design maps are presented for all lattice structures processed and tested herein, to demonstrate their relative merits. Moreover, a two-step FEA was executed on a chosen array of lattices to thoroughly investigate the extensive design possibilities, utilising the elastic-plastic, Drucker-Prager, and concrete damage plasticity material models for PlasGray, PA12, and VeroWhite, respectively, with calibration based on experimental results. The results highlight that the tailored design of Gyroid lattices enabled by AM positions them as promising candidates for lightweight energy-absorbing applications. ©
Förderung
- University of Glasgow
- EPSRC
Zitieren
APA
Schneider, J., & Kumar, S. (2023). Comparative performance evaluation of microarchitected lattices processed via SLS, MJ, and DLP 3D printing methods: Experimental investigation and modelling. Journal of Materials Research and Technology, 26, 7182-7198. https://doi.org/10.1016/j.jmrt.2023.09.061
Vancouver
Schneider J, Kumar S. Comparative performance evaluation of microarchitected lattices processed via SLS, MJ, and DLP 3D printing methods: Experimental investigation and modelling. Journal of Materials Research and Technology. 2023;26:7182-7198. doi:10.1016/j.jmrt.2023.09.061
BibTeX
@article{Schneider2023,
author = {Schneider, Johannes and Kumar, S.},
title = {Comparative performance evaluation of microarchitected lattices processed via SLS, MJ, and DLP 3D printing methods: Experimental investigation and modelling},
journal = {Journal of Materials Research and Technology},
year = {2023},
volume = {26},
pages = {7182--7198},
doi = {10.1016/j.jmrt.2023.09.061}
}
EUVIMED