EUVIMEDEUVIMED entdecken
Crossref

Value-added utilization of secondary aluminum dross in fabricating high-porosity and high-strength foam ceramics

Zhan Zhan, Jing Hou, Qi Yin, Dongsheng Shen, Huizhen Hu, Yuyang Long

Environmental Research · 2026-03 · 292 · 123668

DOI: 10.1016/j.envres.2025.123668 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Environmental Research, 2026-03. Verfasst von Zhan Zhan und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Environmental Science and Engineering, Zhejiang Provincial Key Laboratory of Solid Waste Treatment and Recycling, Zhejiang Engineering Rese…. Hauptthemen laut MEDLINE: Ceramics, Aluminum, Aluminum Oxide. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 32 Literaturangaben. Gefördert von: Key Research and Development Program of Zhejiang Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Secondary aluminum dross (SAD) is a hazardous waste generated during aluminum production and recycling, which poses significant environmental risks when disposed of through conventional landfilling. However, it is rich in aluminum resources. To make rational use of the aluminum resources in SAD, this study presents a method for preparing foam ceramics by partially replacing commercial Al2O3 with SAD without the need for pretreatment, utilizing a particle-stabilized foaming method. The effects of SAD addition, solid content, and nano-sized Al2O3 addition on the porosity and compressive strength of the samples were investigated, and the synergistic regulatory mechanism of the raw material ratio on material properties was analyzed. The optimized conditions were found to be 24.35 wt% SAD addition, 21.81 wt% solid content, and 15.2 wt% nano-sized Al2O3, resulting in foam ceramics with porosity and compressive strength of 92.64 % and 2.28 MPa, respectively. SEM results revealed a multiscale pore structure with large pores (39.34 μm) and small pores (3.73 μm), effectively enhancing the compressive strength of the material. This study overcomes the negative correlation between porosity and compressive strength traditionally observed in foam ceramics, providing an engineering approach for the high-value utilization of SAD.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CeramicsAluminumAluminum OxidePorosityCompressive StrengthMicroscopy, Electron, Scanning

Stichwörter der Autor:innen

Compressive strengthFoam ceramicsPorositySecondary aluminum dross

Substanzen

AluminumAluminum Oxide

Autor:innen und Institutionen

  • School of Environmental Science and Engineering, Zhejiang Provincial Key Laboratory of Solid Waste Treatment and Recycling, Zhejiang Engineering Research Center of Non-ferrous Metal Waste Recycling, Zhejiang Gongshang U…
  • Zhejiang Provincial Rural Revitalization Promotion Center, Hangzhou, 310020, China. Electronic address: huhuizhen9889@163.com.

Förderung

  • Key Research and Development Program of Zhejiang Province

Zitieren

APA

Zhan, Z., Hou, J., Yin, Q., Shen, D., Hu, H., & Long, Y. (2026). Value-added utilization of secondary aluminum dross in fabricating high-porosity and high-strength foam ceramics. Environmental Research, 292, 123668. https://doi.org/10.1016/j.envres.2025.123668

Vancouver

Zhan Z, Hou J, Yin Q, Shen D, Hu H, Long Y. Value-added utilization of secondary aluminum dross in fabricating high-porosity and high-strength foam ceramics. Environmental Research. 2026;292:123668. doi:10.1016/j.envres.2025.123668

BibTeX
@article{Zhan2026,
  author = {Zhan, Zhan and Hou, Jing and Yin, Qi and Shen, Dongsheng and Hu, Huizhen and Long, Yuyang},
  title = {Value-added utilization of secondary aluminum dross in fabricating high-porosity and high-strength foam ceramics},
  journal = {Environmental Research},
  year = {2026},
  volume = {292},
  pages = {123668},
  doi = {10.1016/j.envres.2025.123668}
}
Kostenlos starten →