EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Thermomechanical characterisation data of 30 g/m2 and 150 g/m2 cured unidirectional carbon/epoxy tape prepreg TP 402/T700S

Serafín Sánchez-Carmona, María Luisa Velasco, Alberto Barroso, Elena Correa

Data in Brief · 2023-04 · 47 · 108966

DOI: 10.1016/j.dib.2023.108966 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Data in Brief, 2023-04. Verfasst von Serafín Sánchez-Carmona und 3 weiteren Autor:innen. Beteiligte Einrichtung: Group of Elasticity and Strength of Materials, Department of Continuum Mechanics and Theory of Structures, School of Engineering, Universidad de Sevi…. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 6 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Consejería de Economía, Conocimiento, Empresas y Universidad, Junta de Andalucía, Universidad de Sevilla.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the aim to calculate through the Classical Laminate Theory the most reliable stress value generated in the 90° layer of cross-ply laminates tested under fatigue loading [1], the mechanical and thermal properties were measured for a novel composite material TP402/T700S 12K/35% using two different unidirectional tape prepregs, 30 and 150 g/m2. 0° unidirectional (UD-0), 90° unidirectional (UD-90), ±45°, 10° off-axis and samples for thermal properties measurements were manufactured in an autoclave. Tensile and thermal tests were performed in an Instron 4482 and in an oven, respectively, using strain gauges for all of them. Data collected was analysed following technical standards. The values of the mechanical properties, i.e., elastic and shear stiffness and strength, and the coefficients of thermal expansion (CTEs), α 1 and α 2 , were calculated also obtaining the corresponding statistics.

Schlagwörter

Stichwörter der Autor:innen

Coefficient of Thermal Expansion (CTE)CompositeElastic ModulusMechanical propertiesShear ModulusUltimate Tensile StrengthsUltra-thin ply

Autor:innen und Institutionen

  • Group of Elasticity and Strength of Materials, Department of Continuum Mechanics and Theory of Structures, School of Engineering, Universidad de Sevilla, 41092 Seville (Spain).

Förderung

  • Consejería de Economía, Conocimiento, Empresas y Universidad, Junta de Andalucía
  • Universidad de Sevilla

Zitieren

APA

Sánchez-Carmona, S., Velasco, M. L., Barroso, A., & Correa, E. (2023). Thermomechanical characterisation data of 30 g/m2 and 150 g/m2 cured unidirectional carbon/epoxy tape prepreg TP 402/T700S. Data in Brief, 47, 108966. https://doi.org/10.1016/j.dib.2023.108966

Vancouver

Sánchez-Carmona S, Velasco ML, Barroso A, Correa E. Thermomechanical characterisation data of 30 g/m2 and 150 g/m2 cured unidirectional carbon/epoxy tape prepreg TP 402/T700S. Data in Brief. 2023;47:108966. doi:10.1016/j.dib.2023.108966

BibTeX
@article{SnchezCarmona2023,
  author = {Sánchez-Carmona, Serafín and Velasco, María Luisa and Barroso, Alberto and Correa, Elena},
  title = {Thermomechanical characterisation data of 30 g/m2 and 150 g/m2 cured unidirectional carbon/epoxy tape prepreg TP 402/T700S},
  journal = {Data in Brief},
  year = {2023},
  volume = {47},
  pages = {108966},
  doi = {10.1016/j.dib.2023.108966}
}
Kostenlos starten →