EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Various Morphologies of Graphitic Carbon Nitride (g-C3N4) and Their Effect on the Thermomechanical Properties of Thermoset Epoxy Resin Composites

Dina Al Mais, Samir Mustapha, Yasmine N Baghdadi, Kamal Bouhadir iD, Ali R Tehrani-Bagha

Polymers · 06.07.2024 · 16 (13) · 1935

DOI: 10.3390/polym16131935 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 06.07.2024. Verfasst von Dina Al Mais und 4 weiteren Autor:innen. Beteiligte Einrichtung: B. & W. Bassatne Department of Chemical Engineering and Advanced Energy' American University of Beirut, Beirut P.O. Box 110236, Lebanon. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University Research Board at the American University of Beirut.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research aims to highlight the importance of diverse forms of graphitic carbon nitride (g-C3N4) as strengthening elements in epoxy composites. It explores the influence of three different forms of g-C3N4 and their concentrations on the mechanical properties of the epoxy composites. Various characterization techniques, such as scanning electron microscopy (SEM), dynamic light scattering (DLS), thermogravimetric analysis (TGA), and Fourier-transform infrared spectroscopy (FTIR), were utilized to comprehend the effects of g-C3N4 morphology and particle size on the physical and chemical characteristics of epoxy resin. Mechanical properties, such as tensile strength, strain, modulus, and fracture toughness, were determined for the composite samples. SEM analysis was performed to examine crack morphology in samples with different reinforcements. Findings indicate that optimal mechanical properties were achieved with a 0.5 wt% bulk g-C3N4 filler, enhancing tensile strength by 14%. SEM micrographs of fracture surfaces revealed a transition from brittle to rough morphology, suggesting increased toughness in the composites. While the TGA results showed no significant impact on degradation temperature, dynamic mechanical analysis demonstrated a 17% increase in glass transition temperature. Furthermore, the improvement in thermal breakdown up to 600 °C was attributed to reinforced covalent bonds between carbon and nitrogen, supported by FTIR results.

Schlagwörter

Stichwörter der Autor:innen

epoxy resinfracture toughnessg-C3N4mechanical propertiesthermal properties

Autor:innen und Institutionen

  • B. & W. Bassatne Department of Chemical Engineering and Advanced Energy' American University of Beirut, Beirut P.O. Box 110236, Lebanon.
  • Department of Mechanical Engineering' American University of Beirut, Beirut P.O. Box 110236, Lebanon.
  • Department of Chemical Engineering' Imperial College London' London SW7 2BX' UK.
  • Department of Chemistry' American University of Beirut, Beirut P.O. Box 110236, Lebanon.
  • School of Chemical Engineering' Aalto University' 02150 Espoo, Finland.

ORCID-Profile: Kamal Bouhadir

Förderung

  • University Research Board at the American University of Beirut

Zitieren

APA

Al Mais, D., Mustapha, S., Baghdadi, Y. N., Bouhadir, K., & Tehrani-Bagha, A. R. (2024). Various Morphologies of Graphitic Carbon Nitride (g-C3N4) and Their Effect on the Thermomechanical Properties of Thermoset Epoxy Resin Composites. Polymers, 16(13), 1935. https://doi.org/10.3390/polym16131935

Vancouver

Al Mais D, Mustapha S, Baghdadi YN, Bouhadir K, Tehrani-Bagha AR. Various Morphologies of Graphitic Carbon Nitride (g-C3N4) and Their Effect on the Thermomechanical Properties of Thermoset Epoxy Resin Composites. Polymers. 2024;16(13):1935. doi:10.3390/polym16131935

BibTeX
@article{AlMais2024,
  author = {Al Mais, Dina and Mustapha, Samir and Baghdadi, Yasmine N and Bouhadir, Kamal and Tehrani-Bagha, Ali R},
  title = {Various Morphologies of Graphitic Carbon Nitride (g-C3N4) and Their Effect on the Thermomechanical Properties of Thermoset Epoxy Resin Composites},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {13},
  pages = {1935},
  doi = {10.3390/polym16131935}
}
Kostenlos starten →