Extrusion-printed silicone microarchitectures for geometry-controlled flow in lateral flow diagnostics and paper microfluidics
Biosensors and Bioelectronics · 2027
DOI: 10.1016/j.bios.2026.119259 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biosensors and Bioelectronics, 2027. Verfasst von Mecit Altan Alioglu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Nuclear Engineering, The Pennsylvania State University, University Park, PA, 16802, USA; Huck Institutes of Life Sciences, The Pennsylv…. Hauptthemen laut MEDLINE: Silicones, Microfluidic Analytical Techniques, Biosensing Techniques, Lab-On-A-Chip Devices. Die Arbeit nennt 59 Literaturangaben. Gefördert von: National Science Foundation, Pennsylvania State University, Centers for Disease Control and Prevention.
Abstract (Originalsprache)
Paper-based diagnostics such as lateral flow assays (LFAs) and microfluidic paper-based analytical devices (μPADs) have attracted considerable attention because of their low cost, portability, and ease of use. Currently, to enable fabrication of μPADs and improve LFA performance, hydrophobic blocks are patterned on paper substrates. However, fabrication of high-resolution hydrophobic barriers remains a major challenge. In this work, we developed a novel silicone extrudable ink for the fabrication of hydrophobic features on paper substrates. The ink was formulated using a vinyl-terminated polydimethylsiloxane (vPDMS) and polymethylhydrosiloxane (PMHS) system crosslinked through platinum-catalyzed hydrosilylation, and its rheological properties were tailored by incorporating silica fillers, obtaining a shear-thinning gel suitable for extrusion. The resulting formulation provided tunable properties, controlled deposition, and stable feature formation, enabling simple, low-cost, rapid, and robust fabrication of high-resolution hydrophobic barriers. Using this approach, we demonstrated improved fluid confinement and pattern fidelity on paper substrates, fabricated high-resolution paper microfluidic devices down to 150 μm channel width, and enhanced the sensitivity of an LFA for a malaria diagnostic test. These results highlight the potential of this silicone ink platform as a practical and scalable strategy for advancing high-performance paper-based diagnostic technologies.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Nuclear Engineering, The Pennsylvania State University, University Park, PA, 16802, USA; Huck Institutes of Life Sciences, The Pennsylvania State University, University Park, PA, 16802, USA.
- Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA, 16802, USA.
- Department of Nuclear Engineering, The Pennsylvania State University, University Park, PA, 16802, USA; Huck Institutes of Life Sciences, The Pennsylvania State University, University Park, PA, 16802, USA; Department of…
Förderung
- National Science Foundation
- Pennsylvania State University
- Centers for Disease Control and Prevention
Zitieren
APA
Alioglu, M. A., Natarajan, S., Skrodzki, D., Colak, O., & Pan, D. (2027). Extrusion-printed silicone microarchitectures for geometry-controlled flow in lateral flow diagnostics and paper microfluidics. Biosensors and Bioelectronics. https://doi.org/10.1016/j.bios.2026.119259
Vancouver
Alioglu MA, Natarajan S, Skrodzki D, Colak O, Pan D. Extrusion-printed silicone microarchitectures for geometry-controlled flow in lateral flow diagnostics and paper microfluidics. Biosensors and Bioelectronics. 2027. doi:10.1016/j.bios.2026.119259
BibTeX
@article{Alioglu2027,
author = {Alioglu, Mecit Altan and Natarajan, Satheesh and Skrodzki, David and Colak, Oguzhan and Pan, Dipanjan},
title = {Extrusion-printed silicone microarchitectures for geometry-controlled flow in lateral flow diagnostics and paper microfluidics},
journal = {Biosensors and Bioelectronics},
year = {2027},
doi = {10.1016/j.bios.2026.119259}
}
EUVIMED