EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Streamlined custom manufacturing for optimized 3D printed prostheses through 3D pressure mapping

Hadi Moeinnia, Carl Ganzert, Loren Schubert, Woo Soo Kim

Biosensors and Bioelectronics · 2026-06 · 302 · 118560

DOI: 10.1016/j.bios.2026.118560 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors and Bioelectronics, 2026-06. Verfasst von Hadi Moeinnia und 3 weiteren Autor:innen. Beteiligte Einrichtung: Additive Manufacturing Laboratory, School of Mechatronic Systems Engineering, Simon Fraser University, Surrey, V3T ON1, Canada. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Prosthesis Design, Artificial Limbs, Biosensing Techniques. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study introduces a novel digital workflow for prosthetic socket design that integrates 3D pressure mapping with density-graded lattice structures to improve comfort and reduce impact forces at the limb-socket interface. A wearable liner embedded with capacitive, origami-inspired pressure sensors and flexible interconnections was used to measure dynamic contact pressures on a transfemoral amputee during six static postures and four activities, including standing, side leaning, walking, and ramp descent. Peak pressures reached up to 7500 kPa, with ramp descent exhibiting the most critical load distribution. The pressure data were processed using a weighted averaging method to generate a 3D pressure map, which guided the density grading of three cellular infill types like Gyroid, Diamond, and Neovius. Finite Element Analysis demonstrated that the graded Gyroid structure absorbed up to 1600% more energy than a solid infill during standing and 1290% more during walking. These findings validate a pressure-informed, additively manufactured socket design approach that effectively mitigates localized contact pressures and has the potential to enhance user comfort and prosthetic performance.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalProsthesis DesignArtificial LimbsBiosensing TechniquesHumansPressureWalkingWearable Electronic DevicesFinite Element Analysis

Stichwörter der Autor:innen

Additive manufacturingCellular structuresDensity gradingPressure mappingProsthetic socketWearable devices

Autor:innen und Institutionen

  • Additive Manufacturing Laboratory, School of Mechatronic Systems Engineering, Simon Fraser University, Surrey, V3T ON1, Canada.
  • Hodgson Orthopedic Group, Coquitlam, BC, V3K 6V7, Canada.
  • Additive Manufacturing Laboratory, School of Mechatronic Systems Engineering, Simon Fraser University, Surrey, V3T ON1, Canada. Electronic address: woosook@sfu.ca.

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Moeinnia, H., Ganzert, C., Schubert, L., & Kim, W. S. (2026). Streamlined custom manufacturing for optimized 3D printed prostheses through 3D pressure mapping. Biosensors and Bioelectronics, 302, 118560. https://doi.org/10.1016/j.bios.2026.118560

Vancouver

Moeinnia H, Ganzert C, Schubert L, Kim WS. Streamlined custom manufacturing for optimized 3D printed prostheses through 3D pressure mapping. Biosensors and Bioelectronics. 2026;302:118560. doi:10.1016/j.bios.2026.118560

BibTeX
@article{Moeinnia2026,
  author = {Moeinnia, Hadi and Ganzert, Carl and Schubert, Loren and Kim, Woo Soo},
  title = {Streamlined custom manufacturing for optimized 3D printed prostheses through 3D pressure mapping},
  journal = {Biosensors and Bioelectronics},
  year = {2026},
  volume = {302},
  pages = {118560},
  doi = {10.1016/j.bios.2026.118560}
}
Kostenlos starten →