DIW 3D printing of well-interconnected hierarchically porous microlattice for ultrasensitive photoelectrochemical sensing
Biosensors and Bioelectronics · 2025
DOI: 10.1016/j.bios.2025.117271 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biosensors and Bioelectronics, 2025. Verfasst von Chunjing Zhang und 10 weiteren Autor:innen. Beteiligte Einrichtung: Henan Key Laboratory of Materials on Deep-Earth Engineering, School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo, 4540…. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Biosensing Techniques, Electrochemical Techniques, Molecular Imprinting. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: Science and Technology Support Program of Jiangsu Province, Henan University of Science and Technology, National Natural Science Foundation of China.
Abstract (Originalsprache)
Endowing channel-interconnected photoelectrode with prominent light-absorbing and analyte-trapping is pivotal but challenging for implementing high-performance photoelectrochemical sensing system. Herein, we demonstrated an effective and controllable direct ink writing (DIW) 3D printing coupled with molecular imprinting technology for consistently fabricating microlattice-shaped photoelectrochemical sensor, with multiscale well-interconnected channels created by accessible alliance of regular macrochannels originated from layer-by-layer assembly of printed filaments and abundant microchannels built by jointing molecule-recognized polyaniline (PANI), photoactive TiO2 and conductive graphene (G) nanosheets within filaments. The unique structure merit facilitated ready spreading of incident light into the sensor interior, and meanwhile enabled rapid diffusion/infiltration of analytes onto all specificity binding sites situated inside the sensor, thereby allowing light absorbance and analyte adsorption at a high level. As a result, the 3D-printed molecularly imprinted photoelectrochemical sensor displayed impressive monitoring capability for urea, with rapid response, low detection limit (2 μM), wide linear range (10-700 μM), exceptional selectivity and working stability. This work opens up a promising route for architecting advanced photoelectrochemical devices to cater to highly sensitive and selective sensing.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Henan Key Laboratory of Materials on Deep-Earth Engineering, School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo, 454003, China.
- Key Laboratory of Multifunctional Nanomaterials and Smart Systems, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China.
- Key Laboratory of Multifunctional Nanomaterials and Smart Systems, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China. Electronic address: yfcao2019@sinano.ac.cn.
- Department of Critical Care Medicine, The First Affiliated Hospital of Harbin Medical University, Harbin, 150001, China. Electronic address: bb15104660871@163.com.
- Henan Key Laboratory of Materials on Deep-Earth Engineering, School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo, 454003, China; The Project National United Engineering Laboratory for Adva…
- Henan Key Laboratory of Materials on Deep-Earth Engineering, School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo, 454003, China. Electronic address: zhengpengyang2013@163.com.
Förderung
- Science and Technology Support Program of Jiangsu Province
- Henan University of Science and Technology
- National Natural Science Foundation of China
Zitieren
APA
Zhang, C., Zhang, Y., Wang, Y., Liu, J., Chang, Y., Qin, T., Cao, Y., Bao, X., Li, P., Yang, Z., & Zhang, Y. (2025). DIW 3D printing of well-interconnected hierarchically porous microlattice for ultrasensitive photoelectrochemical sensing. Biosensors and Bioelectronics. https://doi.org/10.1016/j.bios.2025.117271
Vancouver
Zhang C, Zhang Y, Wang Y, Liu J, Chang Y, Qin T, et al. DIW 3D printing of well-interconnected hierarchically porous microlattice for ultrasensitive photoelectrochemical sensing. Biosensors and Bioelectronics. 2025. doi:10.1016/j.bios.2025.117271
BibTeX
@article{Zhang2025,
author = {Zhang, Chunjing and Zhang, Yuanyuan and Wang, Yifan and Liu, Jinpeng and Chang, Yatao and Qin, Tongtong and Cao, Yufang and Bao, Xuejiao and Li, Ping and Yang, Zhengpeng and Zhang, Yongyi},
title = {DIW 3D printing of well-interconnected hierarchically porous microlattice for ultrasensitive photoelectrochemical sensing},
journal = {Biosensors and Bioelectronics},
year = {2025},
doi = {10.1016/j.bios.2025.117271}
}
EUVIMED