EUVIMEDEUVIMED entdecken
Übersichtsarbeit

Recent advances in implantable sensors and electronics using printable materials for advanced healthcare

Seunghyeb Ban, Haran Lee, Jiehao Chen, Hee-Seok Kim, Yuhang Hu, Seong J Cho, Woon-Hong Yeo

Biosensors and Bioelectronics · 2024

DOI: 10.1016/j.bios.2024.116302 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Biosensors and Bioelectronics, 2024. Verfasst von Seunghyeb Ban und 6 weiteren Autor:innen. Beteiligte Einrichtung: George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, 30024, USA; IEN Center for Wearable Intelligent Sy…. Hauptthemen laut MEDLINE: Biosensing Techniques, Prostheses and Implants. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 356 Literaturangaben. Gefördert von: National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This review article focuses on the recent printing technological progress in healthcare, underscoring the significant potential of implantable devices across diverse applications. Printing technologies have widespread use in developing health monitoring devices, diagnostic systems, and surgical devices. Recent years have witnessed remarkable progress in fabricating low-profile implantable devices, driven by advancements in printing technologies and nanomaterials. The importance of implantable biosensors and bioelectronics is highlighted, specifically exploring printing tools using bio-printable inks for practical applications, including a detailed examination of fabrication processes and essential parameters. This review also justifies the need for mechanical and electrical compatibility between bioelectronics and biological tissues. In addition to technological aspects, this article delves into the importance of appropriate packaging methods to enhance implantable devices' performance, compatibility, and longevity, which are made possible by integrating cutting-edge printing technology. Collectively, we aim to shed light on the holistic landscape of implantable biosensors and bioelectronics, showcasing their evolving role in advancing healthcare through innovative printing technologies.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Biosensing TechniquesProstheses and ImplantsHumansElectronicsPrinting, Three-DimensionalEquipment DesignNanostructuresDelivery of Health Care

Stichwörter der Autor:innen

BiomaterialsHealthcare applicationsImplantable devicesPackaging methodsPrinting technologies

Autor:innen und Institutionen

  • George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, 30024, USA; IEN Center for Wearable Intelligent Systems and Healthcare at the Institute for Electronics and Nanotechnolo…
  • Department of Mechanical Engineering, Chungnam National University, 99 Daehak-Ro, Yuseong-Gu, Daejeon, 34134, Republic of Korea.
  • George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, 30024, USA.
  • School of Engineering and Technology, University of Washington Tacoma, Tacoma, WA, 98195, USA.
  • George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, 30024, USA; School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, Atlanta, GA, 30332, USA.
  • Department of Mechanical Engineering, Chungnam National University, 99 Daehak-Ro, Yuseong-Gu, Daejeon, 34134, Republic of Korea. Electronic address: scho@cnu.ac.kr.

Förderung

  • National Science Foundation

Zitieren

APA

Ban, S., Lee, H., Chen, J., Kim, H. S., Hu, Y., Cho, S. J., & Yeo, W. H. (2024). Recent advances in implantable sensors and electronics using printable materials for advanced healthcare. Biosensors and Bioelectronics. https://doi.org/10.1016/j.bios.2024.116302

Vancouver

Ban S, Lee H, Chen J, Kim HS, Hu Y, Cho SJ, et al. Recent advances in implantable sensors and electronics using printable materials for advanced healthcare. Biosensors and Bioelectronics. 2024. doi:10.1016/j.bios.2024.116302

BibTeX
@article{Ban2024,
  author = {Ban, Seunghyeb and Lee, Haran and Chen, Jiehao and Kim, Hee-Seok and Hu, Yuhang and Cho, Seong J and Yeo, Woon-Hong},
  title = {Recent advances in implantable sensors and electronics using printable materials for advanced healthcare},
  journal = {Biosensors and Bioelectronics},
  year = {2024},
  doi = {10.1016/j.bios.2024.116302}
}
Kostenlos starten →