EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D printed scaffolds: Challenges toward developing relevant cellular in vitro models

Beatriz Molina-Martínez, Luis M Liz-Marzán

Biomaterials and Biosystems · 2022-06 · 6 · 100044

DOI: 10.1016/j.bbiosy.2022.100044 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomaterials and Biosystems, 2022-06. Verfasst von Beatriz Molina-Martínez und 1 weiteren Autor:innen. Beteiligte Einrichtung: CIC biomaGUNE, Basque Research and Technology Alliance (BRTA), 20014 Donostia-San Sebastián, Spain. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 10 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Research Council, Agencia Estatal de Investigación.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional (3D) cell culture technology has rapidly emerged, as a result of the increasing demand for improved in vitro systems that better resemble human physiology. Promising microphysiological systems have been fabricated by combining complex 3D culture with 3D-printing technologies. These models overperform existing in vitro systems regarding potential for biofabrication and predictive power. However, most systems under development do not ultimately find a long-term application. We provide herein an overview of the challenges to be considered when developing 3D in vitro systems by means of printed scaffolds, as well as some of the limitations of existing models.

Schlagwörter

Stichwörter der Autor:innen

3D PrintingCell cultureScaffolds

Autor:innen und Institutionen

  • CIC biomaGUNE, Basque Research and Technology Alliance (BRTA), 20014 Donostia-San Sebastián, Spain.
  • Biomedical Research Networking Center in Bioengineering, Biomaterials, and Nanomedicine (CIBER- BBN), 20014 Donostia-San Sebastián, Spain.
  • Ikerbasque, Basque Foundation for Science, 48009 Bilbao, Spain.

Förderung

  • European Research Council
  • Agencia Estatal de Investigación

Zitieren

APA

Molina-Martínez, B., & Liz-Marzán, L. M. (2022). 3D printed scaffolds: Challenges toward developing relevant cellular in vitro models. Biomaterials and Biosystems, 6, 100044. https://doi.org/10.1016/j.bbiosy.2022.100044

Vancouver

Molina-Martínez B, Liz-Marzán LM. 3D printed scaffolds: Challenges toward developing relevant cellular in vitro models. Biomaterials and Biosystems. 2022;6:100044. doi:10.1016/j.bbiosy.2022.100044

BibTeX
@article{MolinaMartnez2022,
  author = {Molina-Martínez, Beatriz and Liz-Marzán, Luis M},
  title = {3D printed scaffolds: Challenges toward developing relevant cellular in vitro models},
  journal = {Biomaterials and Biosystems},
  year = {2022},
  volume = {6},
  pages = {100044},
  doi = {10.1016/j.bbiosy.2022.100044}
}
Kostenlos starten →