EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Effect of temperature history during additive manufacturing on crystalline morphology of PEEK

Austin Lee, Mathew Wynn, Liam Quigley, Marco Salviato, Navid Zobeiry

Advances in Industrial and Manufacturing Engineering · 2022-05 · 4 · 100085

DOI: 10.1016/j.aime.2022.100085 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Industrial and Manufacturing Engineering, 2022-05. Verfasst von Austin Lee und 4 weiteren Autor:innen. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing parameters of high-performance polymers greatly affect the thermal history and consequently quality of the end-part. For fused deposition modeling (FDM), this may include printing speed, filament size, nozzle, and chamber temperatures, as well as build plate temperature. In this study, the effect of thermal convection inside a commercial 3D printer on thermal history and crystalline morphology of polyetheretherketone (PEEK) was investigated using a combined experimental and numerical approach. Using digital scanning calorimetry (DSC) and polarized optical microscopy (POM), crystallinity of PEEK samples was studied as a function of thermal history. In addition, using finite element (FE) simulations of heat transfer, which were calibrated using thermocouple measurements, thermal history of parts during virtual 3D printing was evaluated. By correlating the experimental and numerical results, the effect of printing parameters and convection on thermal history and PEEK crystalline morphology was established. It was found that the high melting temperature of PEEK, results in fast melt cooling rates followed by short annealing times during printing, leading to relatively low degree of crystallinity (DOC) and small crystalline morphology.

Zitieren

APA

Lee, A., Wynn, M., Quigley, L., Salviato, M., & Zobeiry, N. (2022). Effect of temperature history during additive manufacturing on crystalline morphology of PEEK. Advances in Industrial and Manufacturing Engineering, 4, 100085. https://doi.org/10.1016/j.aime.2022.100085

Vancouver

Lee A, Wynn M, Quigley L, Salviato M, Zobeiry N. Effect of temperature history during additive manufacturing on crystalline morphology of PEEK. Advances in Industrial and Manufacturing Engineering. 2022;4:100085. doi:10.1016/j.aime.2022.100085

BibTeX
@article{Lee2022,
  author = {Lee, Austin and Wynn, Mathew and Quigley, Liam and Salviato, Marco and Zobeiry, Navid},
  title = {Effect of temperature history during additive manufacturing on crystalline morphology of PEEK},
  journal = {Advances in Industrial and Manufacturing Engineering},
  year = {2022},
  volume = {4},
  pages = {100085},
  doi = {10.1016/j.aime.2022.100085}
}
Kostenlos starten →