Functional medium entropy alloys for joint replacement: An atomistic perspective of material deformation and a correlation to wear, corrosion, and biocompatibility
Acta Biomaterialia · 2024
DOI: 10.1016/j.actbio.2024.08.031 ↗Kurz gefasst
Fachartikel in der Zeitschrift Acta Biomaterialia, 2024. Verfasst von Avinash Chavan und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Metallurgical and Materials Engineering, Indian Institute of Technology-Kharagpur, Kharagpur 721302, India. Hauptthemen laut MEDLINE: Alloys, Biocompatible Materials, Materials Testing. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 57 Literaturangaben. Gefördert von: Government of India Department of Biotechnology, Ministry of Electronics and Information technology, Department of Science and Technology, Ministry of Science and Technology, India.
Abstract (Originalsprache)
The present study adopts a multi-facet approach to design bio inspired concentrated alloys for potential application as articulating surfaces in joint replacements. A series of equiatomic, Nb rich and Ti rich TiMoNbZr based medium entropy alloys (MEAs) were processed via arc melting and their mechanical, in-vitro corrosion, wear, and in vitro and in vivo biocompatibility were investigated. Equiatomic MEA had primarily bcc with minor hcp phases where the single bcc was achieved with the addition of Nb. The single bcc Nb rich alloy resulted in 13 % elongation, much higher than equiatomic or Ti rich alloy. All the MEAs showed comparatively higher yield strength due to the climb of edge dislocations which is the main rate limiting mechanism at 300 K, as evident molecular dynamics (MD) simulation. The locally fluctuating energy landscape promotes kinks on edge dislocation, and at local minima nanoscale segments gets pinned. Upon yielding the entangled kink leaves a trail of vacancies/interstitials and escapes via climb motion to render high yield strength. The higher corrosion and pitting resistance of Nb enriched alloys can be attributed to the stable ZrO2, Nb2O5, TiO2, and MoO3 oxides, high polarization resistance (106-105 Ωcm-2), and low defect densities (1016-1018). In vitro cell-materials interaction using MC3T3-E1 showed bioinert but cytocompatible nature of the MEAs. The wear rate of the MEAs was in the range of 7-9 × 10-5 mm3N-1m-1. The wear debris did not show any tissue necrosis when implanted in rabbit femur rather new bone regeneration can be seen around the particles. STATEMENT OF SIGNIFICANCE: In the present work, a noble Nb enriched MEAs with superior mechanical, in vitro wear, corrosion and cytocompatibility properties was designed for articulating surfaces in joint replacement.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Metallurgical and Materials Engineering, Indian Institute of Technology-Kharagpur, Kharagpur 721302, India.
- School of Minerals, Metallurgical and Materials Engineering, Indian Institute of Technology Bhubaneshwar, Odisha 752050, India.
- Department of Veterinary Surgery & Radiology, University of Animal & Fishery Sciences, Kolkata, West Bengal 700037, India.
- Department of Metallurgical and Materials Engineering, Indian Institute of Technology-Kharagpur, Kharagpur 721302, India. Electronic address: mroy@metal.iitkgp.ac.in.
Förderung
- Government of India Department of Biotechnology
- Ministry of Electronics and Information technology
- Department of Science and Technology, Ministry of Science and Technology, India
- Indian Institute of Technology Kharagpur
Zitieren
APA
Chavan, A., Avula, I., Sahoo, S. N., Biswal, S., Mandal, S., Musthafa, M., Roy, S., Nandi, S. K., Mukherjee, S., & Roy, M. (2024). Functional medium entropy alloys for joint replacement: An atomistic perspective of material deformation and a correlation to wear, corrosion, and biocompatibility. Acta Biomaterialia. https://doi.org/10.1016/j.actbio.2024.08.031
Vancouver
Chavan A, Avula I, Sahoo SN, Biswal S, Mandal S, Musthafa M, et al. Functional medium entropy alloys for joint replacement: An atomistic perspective of material deformation and a correlation to wear, corrosion, and biocompatibility. Acta Biomaterialia. 2024. doi:10.1016/j.actbio.2024.08.031
BibTeX
@article{Chavan2024,
author = {Chavan, Avinash and Avula, Indu and Sahoo, Satyabrata Nigamananda and Biswal, Sankalp and Mandal, Santanu and Musthafa, Madud and Roy, Subhasis and Nandi, Samit Kumar and Mukherjee, Sankha and Roy, Mangal},
title = {Functional medium entropy alloys for joint replacement: An atomistic perspective of material deformation and a correlation to wear, corrosion, and biocompatibility},
journal = {Acta Biomaterialia},
year = {2024},
doi = {10.1016/j.actbio.2024.08.031}
}
EUVIMED