EUVIMEDEUVIMED entdecken
Crossref

Developing Zn-2Cu-xLi (x < 0.1 wt %) alloys with suitable mechanical properties, degradation behaviors and cytocompatibility for vascular stents

Xiyuan Zhang, Jialin Niu, Kelvin Wai-Kwok Yeung, Hua Huang, Zhiqiang Gao, Chun Chen, Qingqing Guan, Guangjian Zhang, Linlin Zhang, Guanhua Xue, Guangyin Yuan

Acta Biomaterialia · 2026-02 · 211 · 167-187

DOI: 10.1016/j.actbio.2024.06.007 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Acta Biomaterialia, 2026-02. Verfasst von Xiyuan Zhang und 10 weiteren Autor:innen. Beteiligte Einrichtung: National Engineering Research Center of Light Alloy Net Forming and State Key Laboratory of Metal Matrix Composites, School of Materials Science and …. Hauptthemen laut MEDLINE: Stents, Alloys, Materials Testing, Copper. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 100 Literaturangaben. Gefördert von: Science and Technology Commission of Shanghai Municipality, National Key Research and Development Program of China, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biodegradable Zn alloys show great potential for vascular stents due to their moderate degradation rates and acceptable biocompatibility. However, the poor mechanical properties limit their applications. In this study, low alloyed Zn-2Cu-xLi (x = 0.004, 0.01, 0.07 wt %) alloys with favorable mechanical properties were developed. The microstructure consists of fine equiaxed η-Zn grains, micron, submicron-sized and coherent nano ε-CuZn4 phases. The introduced Li exists as a solute in the η-Zn matrix and ε-CuZn4 phase, and results in the increase of ε-CuZn4 volume fraction, the refinement of grains and more uniform distribution of grain sizes. As Li content increases, the strength of alloys is dramatically improved by grain boundary strengthening, precipitate strengthening of ε-CuZn4 and solid solution strengthening of Li. Zn-2Cu-0.07Li alloy has the optimal mechanical properties with a tensile yield strength of 321.8 MPa, ultimate tensile strength of 362.3 MPa and fracture elongation of 28.0 %, exceeding the benchmark of stents. It also has favorable mechanical property stability, weak tension compression yield asymmetry and strain rate sensitivity. It exhibits uniform degradation and a little improved degradation rate of 89.5 μm∙year-1, due to the improved electrochemical activity by increased ε-CuZn4 volume fraction, and generates Li2CO3 and LiOH. It shows favorable cytocompatibility without adverse influence on endothelial cell viability by trace Li+. The fabricated microtubes show favorable mechanical properties, and stents exhibit an average radial strength of 118 kPa. The present study indicates that Zn-2Cu-0.07Li alloy is a potential and promising candidate for vascular stent applications. STATEMENT OF SIGNIFICANCE: Zn alloys are promising candidates for biodegradable vascular stents. However, improving their mechanical properties is challenging. Combining the advantages of Cu and trace Li, Zn-2Cu-xLi (x < 0.1 wt %) alloys were developed for stents. As Li increases, the strength of alloys is dramatically improved by refined grains, increased volume fraction of ε-CuZn4 and solid solution of Li. Zn-2Cu-0.07Li alloy exhibits a TYS exceeding 320 MPa, UTS exceeding 360 MPa and fracture EL of nearly 30 %. It shows favorable mechanical stability, degradation behaviors and cytocompatibility. The alloy was fabricated into microtubes and stents for mechanical property tests to verify application feasibility for the first time. This indicates that Zn-2Cu-0.07Li alloy has great potential for vascular stent applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

StentsAlloysMaterials TestingCopperZincBiocompatible MaterialsBlood Vessel ProsthesisHumansTensile StrengthHuman Umbilical Vein Endothelial Cells

Stichwörter der Autor:innen

DegradationMechanical propertyMicrostructureVascular stentZn alloys

Substanzen

AlloysCopperZincBiocompatible Materials

Autor:innen und Institutionen

  • National Engineering Research Center of Light Alloy Net Forming and State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
  • National Engineering Research Center of Light Alloy Net Forming and State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China. El…
  • Department of Orthopaedics and Traumatology, Li Ka Shing Faculty of Medicine, The University of Hong Kong, Pokfulam, Hong Kong 999077, China.
  • Shanghai MicroPort Endovascular MedTech (Group) Co., Ltd., Shanghai 200120, China.
  • Department of Vascular Surgery, Renji Hospital, School of Medicine, Shanghai Jiao Tong University, Shanghai 200127, China. Electronic address: Guanhuaxue@yeah.net.

Förderung

  • Science and Technology Commission of Shanghai Municipality
  • National Key Research and Development Program of China
  • National Natural Science Foundation of China
  • Shanghai Jiao Tong University

Zitieren

APA

Zhang, X., Niu, J., Yeung, K. W., Huang, H., Gao, Z., Chen, C., Guan, Q., Zhang, G., Zhang, L., Xue, G., & Yuan, G. (2026). Developing Zn-2Cu-xLi (x < 0.1 wt %) alloys with suitable mechanical properties, degradation behaviors and cytocompatibility for vascular stents. Acta Biomaterialia, 211, 167-187. https://doi.org/10.1016/j.actbio.2024.06.007

Vancouver

Zhang X, Niu J, Yeung KW, Huang H, Gao Z, Chen C, et al. Developing Zn-2Cu-xLi (x < 0.1 wt %) alloys with suitable mechanical properties, degradation behaviors and cytocompatibility for vascular stents. Acta Biomaterialia. 2026;211:167-187. doi:10.1016/j.actbio.2024.06.007

BibTeX
@article{Zhang2026,
  author = {Zhang, Xiyuan and Niu, Jialin and Yeung, Kelvin Wai-Kwok and Huang, Hua and Gao, Zhiqiang and Chen, Chun and Guan, Qingqing and Zhang, Guangjian and Zhang, Linlin and Xue, Guanhua and Yuan, Guangyin},
  title = {Developing Zn-2Cu-xLi (x < 0.1 wt %) alloys with suitable mechanical properties, degradation behaviors and cytocompatibility for vascular stents},
  journal = {Acta Biomaterialia},
  year = {2026},
  volume = {211},
  pages = {167--187},
  doi = {10.1016/j.actbio.2024.06.007}
}
Kostenlos starten →