EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of fiber orientation in short glass fiber reinforced adhesives and its effect on adhesive behavior by means of µ-CT

Jens Philipp, E. Stammen, K. Dilger, M. Lang, L. Fröck

Discover Mechanical Engineering · 07.05.2026 · 5 (1)

DOI: 10.1007/s44245-026-00253-4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Discover Mechanical Engineering, online erschienen am 07.05.2026. Verfasst von Jens Philipp und 4 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technische Universität Braunschweig.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fiber-reinforced adhesives are primarily employed in large-scale and highly stressed bonded joints, such as those found in the manufacture of rotor blades for wind energy systems. The subject of the present paper is the usage of non-destructive micro-computed tomography (µ-CT) to gain insights into the causes and effects of the alignment of short glass fibers in structural adhesives resulting from the application process, such as the formation of shell and core zones or the fiber orientation distribution pattern. In order to perform mechanical tests on samples with known specific fiber orientations for investigating adhesive properties that are highly dependent on fiber orientation, the three-dimensional structure of pressed adhesive plates used for sample production was determined beforehand. In that context, results from dynamic fatigue tests on notched tensile specimens with fiber orientations of 0, 30, 60 and 90°, respectively, are presented as well as µ-CT investigations of the notch area with focus on the detection of micro-crack formation. Using prepared adhesive micro-samples from rip plaques at various parameterized application processes as well as laboratory scale adhesive beads, the flow behavior and fiber orientation of the short glass fiber-reinforced adhesive could be determined. In addition, an algorithm for fiber reconstruction was used to determine the fiber orientation and calculate the corresponding orientation tensors components A ij based on CT datasets. Characteristic values from mechanical tests were used as data for numerical investigations by X-FEM simulation with focus on the crack behavior.

Förderung

  • Technische Universität Braunschweig

Zitieren

APA

Philipp, J., Stammen, E., Dilger, K., Lang, M., & Fröck, L. (2026). Analysis of fiber orientation in short glass fiber reinforced adhesives and its effect on adhesive behavior by means of µ-CT. Discover Mechanical Engineering, 5(1). https://doi.org/10.1007/s44245-026-00253-4

Vancouver

Philipp J, Stammen E, Dilger K, Lang M, Fröck L. Analysis of fiber orientation in short glass fiber reinforced adhesives and its effect on adhesive behavior by means of µ-CT. Discover Mechanical Engineering. 2026;5(1). doi:10.1007/s44245-026-00253-4

BibTeX
@article{Philipp2026,
  author = {Philipp, Jens and Stammen, E. and Dilger, K. and Lang, M. and Fröck, L.},
  title = {Analysis of fiber orientation in short glass fiber reinforced adhesives and its effect on adhesive behavior by means of µ-CT},
  journal = {Discover Mechanical Engineering},
  year = {2026},
  volume = {5},
  number = {1},
  doi = {10.1007/s44245-026-00253-4}
}
Kostenlos starten →