EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of sugarcane bagasse ash on the workability and mechanical behaviour of 3D-printed mortar

Syed Muhammad Mudassir Zia, Yong Yuan, Muhammad Irfan-ul-Hassan, Ruyi Sheng, Imoleayo Oluwatoyin Fatoyinbo, Qiling Wang, Jiao-Long Zhang

Low-carbon Materials and Green Construction · 2026

DOI: 10.1007/s44242-026-00100-5 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Low-carbon Materials and Green Construction, 2026. Verfasst von Syed Muhammad Mudassir Zia und 6 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shanghai Rising-Star Program, Science and Technology Commission of Shanghai Municipality, Tongji University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

3D-printed mortar (3DPM) is associated with significant cement consumption, which raises substantial environmental concerns. This study investigates the reuse of sugarcane bagasse ash (SBA), which has a high SiO 2 content, in 3DPM to reduce carbon emissions and to promote sustainable development. The raw SBA was first dried and then ground. Then, five mixtures with varying SBA dosages, ranging from 0 to 20% cement replacement, were developed and tested. This study examines the effects of SBA on key properties of 3DPM, such as flowability, hydration kinetics, setting time, and compressive strength. The results indicate that increasing SBA content reduces the flowability of the mixtures. It significantly reduces the setting time from 207.5 min of the control mix to 49.5 min as the replacement ratio is 20% due to finer particles. The isothermal calorimeter test results indicate that SBA accelerates the cement hydration process, potentially reducing the usage of an accelerator in 3DPM. Including SBA in the mortar mix significantly increased compressive strength within the first 24 h and also up to 28 days. This accelerated reaction boosts the early-age strength development of the concrete mixture, making it especially suitable for applications that demand rapid strength gain.

Förderung

  • Shanghai Rising-Star Program
  • Science and Technology Commission of Shanghai Municipality
  • Tongji University
  • Higher Education Commision, Pakistan

Zitieren

APA

Zia, S. M. M., Yuan, Y., Irfan-ul-Hassan, M., Sheng, R., Fatoyinbo, I. O., Wang, Q., & Zhang, J. (2026). Influence of sugarcane bagasse ash on the workability and mechanical behaviour of 3D-printed mortar. Low-carbon Materials and Green Construction. https://doi.org/10.1007/s44242-026-00100-5

Vancouver

Zia SMM, Yuan Y, Irfan-ul-Hassan M, Sheng R, Fatoyinbo IO, Wang Q, et al. Influence of sugarcane bagasse ash on the workability and mechanical behaviour of 3D-printed mortar. Low-carbon Materials and Green Construction. 2026. doi:10.1007/s44242-026-00100-5

BibTeX
@article{Zia2026,
  author = {Zia, Syed Muhammad Mudassir and Yuan, Yong and Irfan-ul-Hassan, Muhammad and Sheng, Ruyi and Fatoyinbo, Imoleayo Oluwatoyin and Wang, Qiling and Zhang, Jiao-Long},
  title = {Influence of sugarcane bagasse ash on the workability and mechanical behaviour of 3D-printed mortar},
  journal = {Low-carbon Materials and Green Construction},
  year = {2026},
  doi = {10.1007/s44242-026-00100-5}
}
Kostenlos starten →