Developing polycaprolactone-cellulose II composite meshes via direct ink writing for hernia repair
Biomedical Materials & Devices · 16.06.2026
DOI: 10.1007/s44174-026-00728-8 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomedical Materials & Devices, online erschienen am 16.06.2026. Verfasst von Amirali Milani und 6 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben.
Abstract (Originalsprache)
Hernia repair requires meshes that balance mechanical strength and biocompatibility. In this study, poly(ε-caprolactone) (PCL) and microcrystalline cellulose (MCC) composites were fabricated via direct ink writing (DIW) to evaluate their suitability for hernia repair. Rheological analysis confirmed pseudoplastic shear-thinning behavior of the PCL solution, demonstrating its printability. Fourier transform infrared spectroscopy and X-ray diffraction verified successful extraction and regeneration of cellulose II with a crystallinity index of 64.2%. Mechanical testing showed that increasing MCC content reduced tensile strength from 18.46 N/cm (pure PCL) to 11.92 N/cm (8 wt% MCC) and bursting strength from 24.24 to 17.48 N/cm. Although strength decreased with cellulose incorporation, all MCC-containing meshes satisfied the minimum requirement for small hernias (≥ 16 N/cm). Only pure PCL approached the threshold associated with large hernia repair (32 N/cm), indicating that composite meshes are primarily suitable for small-defect applications. All printed meshes were classified as mediumweight (75–80 g/m²), a clinically preferred category. Cytocompatibility evaluation using an MTT assay with C2C12 cells demonstrated enhanced metabolic activity in MCC-containing meshes, exceeding 150% after 48 h for 8 wt% MCC at moderate extract concentrations. SEM analysis confirmed increased cell attachment and spreading with higher cellulose content. Overall, DIW-fabricated PCL-MCC meshes provide tunable mechanical and biological performance, with 4 wt% MCC offering the most balanced combination for hernia repair.
Zitieren
APA
Milani, A., Behravesh, A. H., Hooshmand, M. A., Abdollahi, M., Ghaderi, I., Hedayati, S. K., & Rizvi, G. (2026). Developing polycaprolactone-cellulose II composite meshes via direct ink writing for hernia repair. Biomedical Materials & Devices. https://doi.org/10.1007/s44174-026-00728-8
Vancouver
Milani A, Behravesh AH, Hooshmand MA, Abdollahi M, Ghaderi I, Hedayati SK, et al. Developing polycaprolactone-cellulose II composite meshes via direct ink writing for hernia repair. Biomedical Materials & Devices. 2026. doi:10.1007/s44174-026-00728-8
BibTeX
@article{Milani2026,
author = {Milani, Amirali and Behravesh, Amir Hossein and Hooshmand, Mohammad Amin and Abdollahi, Mahdi and Ghaderi, Iman and Hedayati, Seyyed Kaveh and Rizvi, Ghaus},
title = {Developing polycaprolactone-cellulose II composite meshes via direct ink writing for hernia repair},
journal = {Biomedical Materials & Devices},
year = {2026},
doi = {10.1007/s44174-026-00728-8}
}
EUVIMED