EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Studying the productivity of sewage sludge (SS) components for photocatalytic CO2 transformation to CO and methane

Abdelmoumin Yahia Zerga, Muhammad Tahir, Marouane Dhia Eddine Bouguerra, Hajar Alias

Journal of Umm Al-Qura University for Applied Sciences · 2025-12 · 11 (4) · 813-828

DOI: 10.1007/s43994-024-00185-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Umm Al-Qura University for Applied Sciences, online erschienen am 19.09.2024. Verfasst von Abdelmoumin Yahia Zerga und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: United Arab Emirates University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Energy-efficient photocatalytic CO 2 conversion to sustainable solar fuels is a promising approach for simultaneously resolving energy and environmental concerns. The increased growth of sewage sludge necessitates research and innovation to propose more commercially viable options for lowering the socioeconomic and environmental complications associated with its current treatment. Sewage sludge can be applied to valuable products or used as a feedstock for energy production. According to the characterization results, the sewage sludge contains several metallic oxides (M), including Ni, Al, Mn, and Cu, and semiconductors (Fe 2 O 3 and ZnO). According to the proposed mechanism, ZnO acts as an electron conductor between the Fe 2 O 3 and the active sewage sludge due to forming an n–n type heterojunction. Under visible-light irradiation, photocatalytic CO 2 reduction of sewage sludge was investigated using a fixed bed reactor. The CO 2 reduction produced CO and CH 4 , with production rates of 9.76 and 4.20 µmol g −1 h −1 , respectively, via the electrical conductivity in the sewage sludge elements. Furthermore, the impacts of photocatalyst loading, system reforming, light effect and pressure range were examined, where the methane yield at 0.1 g was 4.23 and 2.26 times significantly higher than at 0.05 and 0.2 g, correspondingly. With catalyst loadings of 0.1 and 0.2 g, the mono-oxide productivity was 1.69 and 2.58, notably greater, respectively. Moreover, the best yield of the CO and methane was obtained by using 0.3 bar as pressure and 10% methanol in H 2 O/CO 2 as a reducing agent. Finally, using sewage sludge to produce a solar fuel based on the presence of active metallic oxide and semi-conductor heterojunctions provides novel insights from molecular and engineering perspectives into converting CO 2 to a green fuel using wastewater sludge. Graphical abstract

Förderung

  • United Arab Emirates University

Zitieren

APA

Zerga, A. Y., Tahir, M., Bouguerra, M. D. E., & Alias, H. (2025). Studying the productivity of sewage sludge (SS) components for photocatalytic CO2 transformation to CO and methane. Journal of Umm Al-Qura University for Applied Sciences, 11(4), 813-828. https://doi.org/10.1007/s43994-024-00185-3

Vancouver

Zerga AY, Tahir M, Bouguerra MDE, Alias H. Studying the productivity of sewage sludge (SS) components for photocatalytic CO2 transformation to CO and methane. Journal of Umm Al-Qura University for Applied Sciences. 2025;11(4):813-828. doi:10.1007/s43994-024-00185-3

BibTeX
@article{Zerga2025,
  author = {Zerga, Abdelmoumin Yahia and Tahir, Muhammad and Bouguerra, Marouane Dhia Eddine and Alias, Hajar},
  title = {Studying the productivity of sewage sludge (SS) components for photocatalytic CO2 transformation to CO and methane},
  journal = {Journal of Umm Al-Qura University for Applied Sciences},
  year = {2025},
  volume = {11},
  number = {4},
  pages = {813--828},
  doi = {10.1007/s43994-024-00185-3}
}
Kostenlos starten →