EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Determination of Cutting Performance of Multi-blade and Diamond-wire Gang Saws Used in Natural Stone Cutting

A. K. Özdogan, M. Karaabat Varol, S. Demirdag

Mining, Metallurgy & Exploration · 2026-06 · 43 (3) · 2121-2139

DOI: 10.1007/s42461-026-01540-0 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Mining, Metallurgy & Exploration, online erschienen am 28.03.2026. Verfasst von A. K. Özdogan und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Suleyman Demirel University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of this study was to investigate the cutting performance of multi-blade and diamond-wire gang saws used in natural stone plants and to determine the more economical option. In the first phase, five different natural stones with varying physical-mechanical properties were cut using both gang saws, and key operational parameters were measured and compared, including cutting speed, bead/socket wear, energy consumption, water consumption, and surface quality of the slabs. The results revealed significant performance differences between the two cutting technologies. The diamond-wire gang saw achieved a cutting speed that was three times higher than that of the multi-blade gang saw. In terms of energy efficiency, a diamond-wire gang saw represents a 36% lower energy consumption than a multi-blade gang saw. The diamond-wire gang saw uses 50% less water than the multi-blade gang saw in terms of water consumption. In the second phase of the study, the ENTROPY-based TOPSIS method was applied to evaluate the two gang saws with respect to energy consumption, cutting quality, cutting time, and bead/socket wear. Consequently, based on this multi-criteria analysis, the diamond-wire gang saw was identified as the superior option, offering advantages in economic efficiency, cutting precision, and operational speed.

Förderung

  • Suleyman Demirel University

Zitieren

APA

Özdogan, A. K., Varol, M. K., & Demirdag, S. (2026). Determination of Cutting Performance of Multi-blade and Diamond-wire Gang Saws Used in Natural Stone Cutting. Mining, Metallurgy & Exploration, 43(3), 2121-2139. https://doi.org/10.1007/s42461-026-01540-0

Vancouver

Özdogan AK, Varol MK, Demirdag S. Determination of Cutting Performance of Multi-blade and Diamond-wire Gang Saws Used in Natural Stone Cutting. Mining, Metallurgy & Exploration. 2026;43(3):2121-2139. doi:10.1007/s42461-026-01540-0

BibTeX
@article{zdogan2026,
  author = {Özdogan, A. K. and Varol, M. Karaabat and Demirdag, S.},
  title = {Determination of Cutting Performance of Multi-blade and Diamond-wire Gang Saws Used in Natural Stone Cutting},
  journal = {Mining, Metallurgy & Exploration},
  year = {2026},
  volume = {43},
  number = {3},
  pages = {2121--2139},
  doi = {10.1007/s42461-026-01540-0}
}
Kostenlos starten →