EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Operando electron optical monitoring for real-time evaporation detection in electron beam powder bed fusion

Timo Berger, Jonas Böhm, Jakob Renner, Benjamin Wahlmann, Carolin Körner

Progress in Additive Manufacturing · 09.11.2026

DOI: 10.1007/s40964-026-02062-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 09.11.2026. Verfasst von Timo Berger und 4 weiteren Autor:innen. Die Arbeit nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Friedrich-Alexander-Universität Erlangen-Nürnberg.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Operando electron optical (ELO) monitoring offers a promising approach for real-time process control in electron beam powder bed fusion (PBF-EB). While in-situ ELO imaging of the solidified surface—as an extra process step—is well established, the electron signal during melting remains insufficiently investigated. In this study, a self-developed four-detector ELO system with a negative bias voltage is used to analyze the operando signal during melting of a Ti–6Al–4V plate and its correlation with evaporation. Square melt areas were produced using different beam current and scan velocity combinations at a constant area energy. A time delayed signal component is attributed to positively charged metal ions formed by evaporation-induced vapor ionization. The extracted ion signal shows strong qualitative agreement with the simulated evaporation, both for the average evaporation intensity in the quasi-stationary regime and for the settling phase within the first hatch lines. In addition, it resolves local evaporation changes during hatching, including maxima at turning points caused by heat accumulation, followed by a systematic decrease in evaporation intensity. These results provide the first experimental evidence that operando ELO could be a strong candidate for real-time monitoring of evaporation in PBF-EB and a promising tool for assessing and controlling the thermal homogeneity of the melting process.

Förderung

  • Friedrich-Alexander-Universität Erlangen-Nürnberg

Zitieren

APA

Berger, T., Böhm, J., Renner, J., Wahlmann, B., & Körner, C. (2026). Operando electron optical monitoring for real-time evaporation detection in electron beam powder bed fusion. Progress in Additive Manufacturing. https://doi.org/10.1007/s40964-026-02062-3

Vancouver

Berger T, Böhm J, Renner J, Wahlmann B, Körner C. Operando electron optical monitoring for real-time evaporation detection in electron beam powder bed fusion. Progress in Additive Manufacturing. 2026. doi:10.1007/s40964-026-02062-3

BibTeX
@article{Berger2026,
  author = {Berger, Timo and Böhm, Jonas and Renner, Jakob and Wahlmann, Benjamin and Körner, Carolin},
  title = {Operando electron optical monitoring for real-time evaporation detection in electron beam powder bed fusion},
  journal = {Progress in Additive Manufacturing},
  year = {2026},
  doi = {10.1007/s40964-026-02062-3}
}
Kostenlos starten →