Operando electron optical monitoring in electron beam powder bed fusion: characteristic signatures as fault indicator
Progress in Additive Manufacturing · 2026-02 · 11 (2) · 2081-2094
DOI: 10.1007/s40964-025-01459-w ↗Kurz gefasst
Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 15.12.2025. Verfasst von Jihui Ye und 8 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Friedrich-Alexander-Universität Erlangen-Nürnberg.
Abstract (Originalsprache)
Electron optical imaging shows significant potential as a process monitoring technique in electron beam powder bed fusion. When the primary electron beam interacts with substrate materials, electrons are emitted from the surface. These electrons carry essential surface information that can be used for monitoring. Usually, an additional step is incorporated into the process where the electron beam scans the entire surface, generating optical images layer by layer, known as in situ electron optical imaging. However, the potential of electrons emitted during the melting process, called operando signals, has not been fully utilised. By correlating X-ray computed tomography measurements, in situ, and operando electron optical monitoring, this study reveals a strong correlation between outliers in the operando signal and the start of defect formation. The defect initiation is often associated with strong balling which results in abnormal high operando signal intensity. The defect development leads to topographical features that can be effectively captured by subtracting operando signals from opposite detector pairs. These observations suggest that operando electron optical imaging is a strong tool to identify the initiation of faults in electron beam powder bed fusion.
Förderung
- Friedrich-Alexander-Universität Erlangen-Nürnberg
Zitieren
APA
Ye, J., Semjatov, N., Kandler, M., Renner, J., Kloos, N., Mrzljak, S., Walther, F., Wahlmann, B., & Körner, C. (2026). Operando electron optical monitoring in electron beam powder bed fusion: characteristic signatures as fault indicator. Progress in Additive Manufacturing, 11(2), 2081-2094. https://doi.org/10.1007/s40964-025-01459-w
Vancouver
Ye J, Semjatov N, Kandler M, Renner J, Kloos N, Mrzljak S, et al. Operando electron optical monitoring in electron beam powder bed fusion: characteristic signatures as fault indicator. Progress in Additive Manufacturing. 2026;11(2):2081-2094. doi:10.1007/s40964-025-01459-w
BibTeX
@article{Ye2026,
author = {Ye, Jihui and Semjatov, Nick and Kandler, Moritz and Renner, Jakob and Kloos, Niklas and Mrzljak, Selim and Walther, Frank and Wahlmann, Benjamin and Körner, Carolin},
title = {Operando electron optical monitoring in electron beam powder bed fusion: characteristic signatures as fault indicator},
journal = {Progress in Additive Manufacturing},
year = {2026},
volume = {11},
number = {2},
pages = {2081--2094},
doi = {10.1007/s40964-025-01459-w}
}
EUVIMED