EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A data-based approach for predicting hardness in friction stir additive manufacturing of EN AW-7075-T6

Martina Elisabeth Sigl, Martin Guggemos, Moritz Goeldner, Fabian Vieltorf, Michael Friedrich Zaeh

Progress in Additive Manufacturing · 09.11.2026

DOI: 10.1007/s40964-026-02003-0 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 09.11.2026. Verfasst von Martina Elisabeth Sigl und 4 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technische Universität München.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Friction stir additive manufacturing (FSAM) is an emerging additive manufacturing process for fabricating large aerospace components made from aluminum alloys (e.g., EN AW-7075-T6). In the studies presented in this article, the hardness losses typical for this process were addressed. The objective of the investigations was to model these hardness losses using non-numerical methods, thereby increasing their applicability to industry. It was demonstrated that the hardness of the topmost layer was similar across parts with different numbers of layers due to the application of a temperature control system. A time-temperature metric (called cumulated hold time) was defined to predict the mean hardness of the underlying reheated layers (correlation coefficient of − 0.951). Using the lumped capacitance method, the cumulated hold time was modeled from the energy per length during welding. The developed submodels enable prediction of hardness profiles with an RMSE of 2.3 HV 0.2 and identification of suitable process parameters without measuring the part’s temperatures during fabrication. Experimental investigations showed that the welding temperature had a small positive effect on the hardness of the top layers and a negative one on the bottom layers; however, the positive effect of the welding speed on the hardness of all layers was dominant.

Förderung

  • Technische Universität München

Zitieren

APA

Sigl, M. E., Guggemos, M., Goeldner, M., Vieltorf, F., & Zaeh, M. F. (2026). A data-based approach for predicting hardness in friction stir additive manufacturing of EN AW-7075-T6. Progress in Additive Manufacturing. https://doi.org/10.1007/s40964-026-02003-0

Vancouver

Sigl ME, Guggemos M, Goeldner M, Vieltorf F, Zaeh MF. A data-based approach for predicting hardness in friction stir additive manufacturing of EN AW-7075-T6. Progress in Additive Manufacturing. 2026. doi:10.1007/s40964-026-02003-0

BibTeX
@article{Sigl2026,
  author = {Sigl, Martina Elisabeth and Guggemos, Martin and Goeldner, Moritz and Vieltorf, Fabian and Zaeh, Michael Friedrich},
  title = {A data-based approach for predicting hardness in friction stir additive manufacturing of EN AW-7075-T6},
  journal = {Progress in Additive Manufacturing},
  year = {2026},
  doi = {10.1007/s40964-026-02003-0}
}
Kostenlos starten →