EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser powder bed fusion and heat treatment of a Mg2Si-rich aluminium alloy

Keyur Solanki, Paul Lobpreis, Carolin Zinn, Axel von Hehl

Progress in Additive Manufacturing · 2026-05 · 11 (5) · 4611-4631

DOI: 10.1007/s40964-026-01583-1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 09.04.2026. Verfasst von Keyur Solanki und 3 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universität Siegen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser Powder Bed Fusion (LPBF) research on aluminum alloys has predominantly focused on commercial Al–Si–Mg systems with modest Mg 2 Si contents, leaving the heat-treatment response of Mg 2 Si-rich compositions largely unexplored. This study investigates, for the first time, the hardness response of an LPBF-tailored aluminum alloy containing 3.94 ma% Mg 2 Si—over twice the equilibrium solid-state solubility limit—and identifies an optimized post-processing route to enhance mechanical performance. Three heat-treatment conditions were investigated: direct aging, solution annealing (SA), and combined solution annealing plus artificial aging (SA + A). Hardness mapping revealed that direct aging at 190 °C for 330 min achieved the highest hardness of 164 HBW2.5/67.5. The as-built and direct aged conditions were investigated using SEM, EBSD, and TEM to provide a comparative perspective of the microstructural changes that explain the increase in specimen hardness between the two conditions. The as-built state revealed a highly supersaturated α-Al matrix concentrated with early stage Al-, Mg- rich clusters and a refined Si network. In the direct aged condition, nanoscale precipitates were observed, consistent with the precipitation of Mg- and Si-rich phases responsible for the hardening response. The results indicate that the supersaturated solid solution generated during LPBF processing renders a solution-annealing step unnecessary, offering significant reductions in energy consumption. By correlating the heat-treatment routes with the resulting hardness and investigating the increase in hardness by microstructural investigations, this work provides a comprehensive comparison of post-processing routes and offers new insights into designing efficient, and sustainable thermal treatments for high performance aluminum alloys.

Förderung

  • Universität Siegen

Zitieren

APA

Solanki, K., Lobpreis, P., Zinn, C., & Hehl, A. V. (2026). Laser powder bed fusion and heat treatment of a Mg2Si-rich aluminium alloy. Progress in Additive Manufacturing, 11(5), 4611-4631. https://doi.org/10.1007/s40964-026-01583-1

Vancouver

Solanki K, Lobpreis P, Zinn C, Hehl AV. Laser powder bed fusion and heat treatment of a Mg2Si-rich aluminium alloy. Progress in Additive Manufacturing. 2026;11(5):4611-4631. doi:10.1007/s40964-026-01583-1

BibTeX
@article{Solanki2026,
  author = {Solanki, Keyur and Lobpreis, Paul and Zinn, Carolin and Hehl, Axel von},
  title = {Laser powder bed fusion and heat treatment of a Mg2Si-rich aluminium alloy},
  journal = {Progress in Additive Manufacturing},
  year = {2026},
  volume = {11},
  number = {5},
  pages = {4611--4631},
  doi = {10.1007/s40964-026-01583-1}
}
Kostenlos starten →