EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

CMT deposition of stainless steel: effects of process parameters on energy demand and microstructure

Angioletta Rita Catalano, Vincenzo Tebaldo, Paolo C. Priarone, Luca Settineri, Maria Giulia Faga

Progress in Additive Manufacturing · 2025-09 · 10 (9) · 6993-7013

DOI: 10.1007/s40964-025-01022-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 01.03.2025. Verfasst von Angioletta Rita Catalano und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Regione Piemonte, Politecnico di Torino.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sustainable manufacturing is gaining momentum as industries strive to minimize the environmental impact of manufacturing and improve sustainability by maximizing the resource efficiency and reducing waste. Additive manufacturing (AM), as a technology that demands fewer raw materials and produces less waste compared to more traditional manufacturing approaches, could inherently support these goals. Among the different AM processes, wire arc additive manufacturing (WAAM) and cold metal transfer (CMT) have shown promise, particularly in the steel production field, where forging, casting and machining have so far been the predominant processes. In order to achieve an effective transition to sustainable manufacturing practices, it is necessary to fully characterize the CMT process, not only from an energy perspective but also by ensuring a high material utilization efficiency and product quality. In this study, the main process parameters have been varied in the deposition of single beads and multilayer structures made of AWS ER 308L Si, and the results have been analyzed in terms of specific energy consumption, microstructure and microhardness of the as-built structures. Overall, the study concludes that the process parameters primarily control energy consumption and the heat applied to the components, rather than the resulting microstructure, which, instead, is influenced more by thermal cycling resulting from the layer-by-layer deposition process. This suggests that process parameters could be selected with a focus on energy savings without significant adverse effects on material properties.

Förderung

  • Regione Piemonte
  • Politecnico di Torino

Zitieren

APA

Catalano, A. R., Tebaldo, V., Priarone, P. C., Settineri, L., & Faga, M. G. (2025). CMT deposition of stainless steel: effects of process parameters on energy demand and microstructure. Progress in Additive Manufacturing, 10(9), 6993-7013. https://doi.org/10.1007/s40964-025-01022-7

Vancouver

Catalano AR, Tebaldo V, Priarone PC, Settineri L, Faga MG. CMT deposition of stainless steel: effects of process parameters on energy demand and microstructure. Progress in Additive Manufacturing. 2025;10(9):6993-7013. doi:10.1007/s40964-025-01022-7

BibTeX
@article{Catalano2025,
  author = {Catalano, Angioletta Rita and Tebaldo, Vincenzo and Priarone, Paolo C. and Settineri, Luca and Faga, Maria Giulia},
  title = {CMT deposition of stainless steel: effects of process parameters on energy demand and microstructure},
  journal = {Progress in Additive Manufacturing},
  year = {2025},
  volume = {10},
  number = {9},
  pages = {6993--7013},
  doi = {10.1007/s40964-025-01022-7}
}
Kostenlos starten →