EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Alloying and Surface Compositing of Copper Alloy Castings Using Mold and Core Coatings

Kaustubh Kishore Rane, Mehran Zare, Flavio Toma, Swaroop Kumar Behera, Benjamin Church, Pradeep Rohatgi

International Journal of Metalcasting · 01.04.2026

DOI: 10.1007/s40962-026-01959-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Metalcasting, online erschienen am 01.04.2026. Verfasst von Kaustubh Kishore Rane und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NSF WEP I/UCRC.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a technique for simultaneous surface alloying and surface compositing (SASC) of C89836 brass castings. Core surfaces were coated with a slurry of Cu, Ni, and Ni-coated graphite powders before casting. During solidification, Ni and Cu dissolved into the melt and enriched the surface, while graphite particles were embedded in the matrix, forming a composite layer. Microstructural characterization by optical microscopy, SEM, and XRD confirmed uniform Ni enrichment and graphite incorporation. Electrochemical and Inductively Coupled Plasma Mass Spectrometry tests showed SASC castings had reduced corrosion rates and lower lead leaching, while machinability improved through the formation of short, granular chips instead of long, spiral chips. Compared with both the base alloy and Ni/Cu surface alloyed castings, SASC provided simultaneous improvements in corrosion resistance, lead leaching mitigation, and machinability. These findings demonstrate the potential of SASC technique for producing safer, high-performance brass components by integrating alloying and compositing in a single step.

Förderung

  • NSF WEP I/UCRC

Zitieren

APA

Rane, K. K., Zare, M., Toma, F., Behera, S. K., Church, B., & Rohatgi, P. (2026). Surface Alloying and Surface Compositing of Copper Alloy Castings Using Mold and Core Coatings. International Journal of Metalcasting. https://doi.org/10.1007/s40962-026-01959-7

Vancouver

Rane KK, Zare M, Toma F, Behera SK, Church B, Rohatgi P. Surface Alloying and Surface Compositing of Copper Alloy Castings Using Mold and Core Coatings. International Journal of Metalcasting. 2026. doi:10.1007/s40962-026-01959-7

BibTeX
@article{Rane2026,
  author = {Rane, Kaustubh Kishore and Zare, Mehran and Toma, Flavio and Behera, Swaroop Kumar and Church, Benjamin and Rohatgi, Pradeep},
  title = {Surface Alloying and Surface Compositing of Copper Alloy Castings Using Mold and Core Coatings},
  journal = {International Journal of Metalcasting},
  year = {2026},
  doi = {10.1007/s40962-026-01959-7}
}
Kostenlos starten →