EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Exploring the Solidification Sequence and Solid-State Transformations in High-Boron Multi-Component Cast Alloys by Differential Scanning Calorimetry

Yuliia Chabak, Michail Golinskyi, Maria Podobova, Ivan Petryshynets, Vasily Efremenko, Vadym Zurnadzhy, Hossam Halfa, Bohdan Efremenko, Yuliya Khrunyk

International Journal of Metalcasting · 2025-09 · 19 (5) · 2757-2773

DOI: 10.1007/s40962-024-01495-2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Metalcasting, online erschienen am 16.12.2024. Verfasst von Yuliia Chabak und 8 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education and Science of Ukraine, Agentúra na Podporu Výskumu a Vývoja, EU Next Generation EU through the Recovery and Resilience Plan for Slovakia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The newly designed multi-component (Fe–5 wt.% W–5 wt.% Mo–5 wt.% V–10 wt.% Cr–2.5 wt.% Ti) cast alloys, containing 0.7–1.1 wt.% C and 2.7–3.6 wt.% B, are intended for tribological applications. The present work was aimed at studying the solidification sequence and phase transformation temperature intervals of the above-mentioned alloys, in order to elucidate their structural status and further develop an appropriate heat treatment regime. For this purpose, Differential Scanning Calorimetry (DSC), microstructure observation and thermodynamic modeling were applied. Two temperature ranges of exothermic reaction (caused by the release of latent heat during transformation) were revealed at 1200-1091 °C and ≤400 °C. The first range was caused by the primary carboboride (M(C,B), M 2 (B,C) 5 ) precipitation, followed by sequential eutectic reactions with the formation of carboborides M 2 (B,C) 5 , M 7 (C,B) 3 , and M 3 (C,B). The temperature ranges of eutectic transformations decreased with the increase in carbon and boron contents. Low-temperature exothermic reactions (at 399-181 °C) referred to the transformation of austenite into bainite or martensite. The values of the latent heat of the transformations were calculated and discussed. Graphical Abstract

Förderung

  • Ministry of Education and Science of Ukraine
  • Agentúra na Podporu Výskumu a Vývoja
  • EU Next Generation EU through the Recovery and Resilience Plan for Slovakia
  • Slovak Academy of Sciences

Zitieren

APA

Chabak, Y., Golinskyi, M., Podobova, M., Petryshynets, I., Efremenko, V., Zurnadzhy, V., Halfa, H., Efremenko, B., & Khrunyk, Y. (2025). Exploring the Solidification Sequence and Solid-State Transformations in High-Boron Multi-Component Cast Alloys by Differential Scanning Calorimetry. International Journal of Metalcasting, 19(5), 2757-2773. https://doi.org/10.1007/s40962-024-01495-2

Vancouver

Chabak Y, Golinskyi M, Podobova M, Petryshynets I, Efremenko V, Zurnadzhy V, et al. Exploring the Solidification Sequence and Solid-State Transformations in High-Boron Multi-Component Cast Alloys by Differential Scanning Calorimetry. International Journal of Metalcasting. 2025;19(5):2757-2773. doi:10.1007/s40962-024-01495-2

BibTeX
@article{Chabak2025,
  author = {Chabak, Yuliia and Golinskyi, Michail and Podobova, Maria and Petryshynets, Ivan and Efremenko, Vasily and Zurnadzhy, Vadym and Halfa, Hossam and Efremenko, Bohdan and Khrunyk, Yuliya},
  title = {Exploring the Solidification Sequence and Solid-State Transformations in High-Boron Multi-Component Cast Alloys by Differential Scanning Calorimetry},
  journal = {International Journal of Metalcasting},
  year = {2025},
  volume = {19},
  number = {5},
  pages = {2757--2773},
  doi = {10.1007/s40962-024-01495-2}
}
Kostenlos starten →