Numerical Simulation of Lost-Foam Casting for Key Components of A356 Aluminum Alloy in New Energy Vehicles
Materials · 15.05.2024 · 17 (10) · 2363
DOI: 10.3390/ma17102363 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 15.05.2024. Verfasst von Chi Sun und 6 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Automobile Materials of Ministry of Education, Department of Materials Science and Engineering, Nanling Campus, Jilin University, C…. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Science and Technology Development Program of Jilin Province, China, the Science and Technology Development Program of Changchun City, the Undergraduate Innovation Fund of Jilin University, China.
Abstract (Originalsprache)
The intricate geometry and thin walls of the motor housing in new energy vehicles render it susceptible to casting defects during conventional casting processes. However, the lost-foam casting process holds a unique advantage in eliminating casting defects and ensuring the strength and air-tightness of thin-walled castings. In this paper, the lost-foam casting process of thin-walled A356 alloy motor housing was simulated using ProCAST software (2016.0). The results indicate that the filling process is stable and exhibits characteristics of diffusive filling. Solidification occurs gradually from thin to thick. Defect positions are accurately predicted. Through analysis of the defect volume range, the optimal process parameter combination is determined to be a pouring temperature of 700 °C, an interfacial heat transfer coefficient of 50, and a sand thermal conductivity coefficient of 0.5. Microscopic analysis of the motor housing fabricated using the process optimized through numerical simulations reveals the absence of defects such as shrinkage at critical locations.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Automobile Materials of Ministry of Education, Department of Materials Science and Engineering, Nanling Campus, Jilin University, Changchun 130025, China.
- FAW Foundry Co., Ltd., Changchun 130013, China.
- School of Mechanical and Aerospace Engineering, Nanling Campus, Jilin University, Changchun 130025, China.
ORCID-Profile: Feng Qiu
Förderung
- the Science and Technology Development Program of Jilin Province, China
- the Science and Technology Development Program of Changchun City
- the Undergraduate Innovation Fund of Jilin University, China
Zitieren
APA
Sun, C., Cao, Z., Jin, Y., Cui, H., Wang, C., Qiu, F., & Shu, S. (2024). Numerical Simulation of Lost-Foam Casting for Key Components of A356 Aluminum Alloy in New Energy Vehicles. Materials, 17(10), 2363. https://doi.org/10.3390/ma17102363
Vancouver
Sun C, Cao Z, Jin Y, Cui H, Wang C, Qiu F, et al. Numerical Simulation of Lost-Foam Casting for Key Components of A356 Aluminum Alloy in New Energy Vehicles. Materials. 2024;17(10):2363. doi:10.3390/ma17102363
BibTeX
@article{Sun2024,
author = {Sun, Chi and Cao, Zhanyi and Jin, Yanzhu and Cui, Hongyu and Wang, Chenggang and Qiu, Feng and Shu, Shili},
title = {Numerical Simulation of Lost-Foam Casting for Key Components of A356 Aluminum Alloy in New Energy Vehicles},
journal = {Materials},
year = {2024},
volume = {17},
number = {10},
pages = {2363},
doi = {10.3390/ma17102363}
}
EUVIMED