Green Ironmaking at Higher H2 Pressure: Reduction Kinetics and Microstructure Formation During Hydrogen-Based Direct Reduction of Hematite Pellets
Journal of Sustainable Metallurgy · 2024-09 · 10 (3) · 1127-1140
DOI: 10.1007/s40831-024-00877-4 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Sustainable Metallurgy, online erschienen am 01.07.2024. Verfasst von Özge Özgün und 4 weiteren Autor:innen. Beteiligte Einrichtung: Max Planck Institute for Sustainable Materials GmbH, Max-Planck-Straße 1, 40237 Düsseldorf, Germany. Die Arbeit wurde bisher 48-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, European Research Council, Max-Planck-Institut für Eisenforschung GmbH.
Abstract (Originalsprache)
Hydrogen-based direct reduction (HyDR) of iron ores has attracted immense attention and is considered a forerunner technology for sustainable ironmaking. It has a high potential to mitigate CO 2 emissions in the steel industry, which accounts today for ~ 8–10% of all global CO 2 emissions. Direct reduction produces highly porous sponge iron via natural-gas-based or gasified-coal-based reducing agents that contain hydrogen and organic molecules. Commercial technologies usually operate at elevated pressure, e.g., the MIDREX process at 2 bar and the HyL/Energiron process at 6–8 bar. However, the impact of H 2 pressure on reduction kinetics and microstructure evolution of hematite pellets during hydrogen-based direct reduction has not been well understood. Here, we present a study about the influence of H 2 pressure on the reduction kinetics of hematite pellets with pure H 2 at 700 °C at various pressures, i.e., 1, 10, and 100 bar under static gas exposure, and 1.3 and 50 bar under dynamic gas exposure. The microstructure of the reduced pellets was characterized by combining X-ray diffraction and scanning electron microscopy equipped with electron backscatter diffraction. The results provide new insights into the critical role of H 2 pressure in the hydrogen-based direct reduction process and establish a direction for future furnace design and process optimization. Graphical Abstract
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Max Planck Institute for Sustainable Materials GmbH, Max-Planck-Straße 1, 40237 Düsseldorf, Germany.
- Institute of Materials Science, Technische Universität Darmstadt, 64287 Darmstadt, Germany.
ORCID-Profile: Yan Ma
Förderung
- Deutsche Forschungsgemeinschaft
- European Research Council
- Max-Planck-Institut für Eisenforschung GmbH
Zitieren
APA
Özgün, Ö., Dirba, I., Gutfleisch, O., Ma, Y., & Raabe, D. (2024). Green Ironmaking at Higher H2 Pressure: Reduction Kinetics and Microstructure Formation During Hydrogen-Based Direct Reduction of Hematite Pellets. Journal of Sustainable Metallurgy, 10(3), 1127-1140. https://doi.org/10.1007/s40831-024-00877-4
Vancouver
Özgün Ö, Dirba I, Gutfleisch O, Ma Y, Raabe D. Green Ironmaking at Higher H2 Pressure: Reduction Kinetics and Microstructure Formation During Hydrogen-Based Direct Reduction of Hematite Pellets. Journal of Sustainable Metallurgy. 2024;10(3):1127-1140. doi:10.1007/s40831-024-00877-4
BibTeX
@article{zgn2024,
author = {Özgün, Özge and Dirba, Imants and Gutfleisch, Oliver and Ma, Yan and Raabe, Dierk},
title = {Green Ironmaking at Higher H2 Pressure: Reduction Kinetics and Microstructure Formation During Hydrogen-Based Direct Reduction of Hematite Pellets},
journal = {Journal of Sustainable Metallurgy},
year = {2024},
volume = {10},
number = {3},
pages = {1127--1140},
doi = {10.1007/s40831-024-00877-4}
}
EUVIMED