Interface Contact Optimization via Phosphomolybdic Acid Enables 24.9% Efficiency in MoOX-Based Silicon Solar Cells
Nano-Micro Letters · 2027-12 · 19 (1)
DOI: 10.1007/s40820-026-02250-4 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nano-Micro Letters, online erschienen am 31.07.2026. Verfasst von Shaopeng Chen und 11 weiteren Autor:innen. Beteiligte Einrichtung: School of Information Science and Technology, Key Laboratory Optoelectronics Technology Ministry of Education, Beijing University of Technology, Beij…. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The development of cost-effective carrier-selective passivating contacts is critical for enhancing the commercial feasibility of silicon compound solar cells. Molybdenum oxide (MoO X ) has garnered considerable interest as a promising hole transport layer (HTLs). A key advantage of MoO X is high work function, in addition to the low-cost processability. However, in silicon photovoltaics, MoO X -based p -type contacts face fundamental limitations at hydrogenated amorphous silicon (i-a-Si:H)/MoO X interface, where oxygen vacancy defects lower work function, as well as, weak van der Waals-dominated interactions impair charge carry transport. To address these challenges, we introduced an ultrathin phosphomolybdic acid (PMA) interlayer at the i-a-Si:H/MoO X interface. PMA passivated oxygen vacancy defects, resulting in a notable improvement in open-circuit voltage from 713 to 730 mV, and 0.11 eV work function elevation via dipole formation; meanwhile, PMA strengthened the interfacial bonding energy, reducing saturation current density and contact resistance by 63% and 24%, respectively, contributing to a fill factor enhancement from 83.7% to 84.9%. In the end, we demonstrated a record efficiency of 24.9% for MoO X -based silicon solar cells, which provides valuable insights for developing high-performance MoO X HTL devices for dopant-free p -type contact technologies.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Information Science and Technology, Key Laboratory Optoelectronics Technology Ministry of Education, Beijing University of Technology, Beijing, 100124, People's Republic of China.
- School of Information Science and Technology, Key Laboratory Optoelectronics Technology Ministry of Education, Beijing University of Technology, Beijing, 100124, People's Republic of China. kangqian@bjut.edu.cn.
- College of Materials Science and Engineering, Beijing University of Technology, Beijing, 100124, People's Republic of China.
- School of Physics and Optoelectronic Engineering, Beijing University of Technology, Beijing, 100124, People's Republic of China.
- College of Materials Science and Engineering, Beijing University of Technology, Beijing, 100124, People's Republic of China. zilong.zheng@bjut.edu.cn.
- School of Information Science and Technology, Key Laboratory Optoelectronics Technology Ministry of Education, Beijing University of Technology, Beijing, 100124, People's Republic of China. yzzhang@bjut.edu.cn.
Zitieren
APA
Chen, S., Kang, Q., Yang, X., Zhang, H., Li, J., Lu, W., Yang, L., Liu, T., Yuan, D., Zheng, Z., Yan, H., & Zhang, Y. (2027). Interface Contact Optimization via Phosphomolybdic Acid Enables 24.9% Efficiency in MoOX-Based Silicon Solar Cells. Nano-Micro Letters, 19(1). https://doi.org/10.1007/s40820-026-02250-4
Vancouver
Chen S, Kang Q, Yang X, Zhang H, Li J, Lu W, et al. Interface Contact Optimization via Phosphomolybdic Acid Enables 24.9% Efficiency in MoOX-Based Silicon Solar Cells. Nano-Micro Letters. 2027;19(1). doi:10.1007/s40820-026-02250-4
BibTeX
@article{Chen2027,
author = {Chen, Shaopeng and Kang, Qian and Yang, Xiqi and Zhang, Hao and Li, Jingjie and Lu, Wanyu and Yang, Linfeng and Liu, Tinghao and Yuan, Dayong and Zheng, Zilong and Yan, Hui and Zhang, Yongzhe},
title = {Interface Contact Optimization via Phosphomolybdic Acid Enables 24.9% Efficiency in MoOX-Based Silicon Solar Cells},
journal = {Nano-Micro Letters},
year = {2027},
volume = {19},
number = {1},
doi = {10.1007/s40820-026-02250-4}
}
EUVIMED