EUVIMEDEUVIMED entdecken
Crossref

Copper‐Poor Copper Sulfide Enables High‐Efficiency and Stable Perovskite Solar Cells via Interface Modification

Ziyi Wang, Jiangling Li, Wuchen Xiang, Shuping Xiao, Rui Wu, Liang Ma, Hongwei Lei, Guojia Fang, Qingbo Liu, Pingli Qin

Advanced Functional Materials · 2025-02 · 35 (8)

DOI: 10.1002/adfm.202415709 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 11.12.2024. Verfasst von Ziyi Wang und 9 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 62 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The copper content in copper sulfide significantly influences the material properties, potentially affecting interfacial non‐radiative recombination in perovskite solar cells. Here, a simple ball‐milling strategy is used to obtain Cu‐poor (cupric sulfide, CuS) and Cu‐rich (cuprous sulfide, Cu 2 S) nanoparticles (in which CuS and Cu 2 S are the dominant phases respectively, containing a mixture of CuO/Cu(OH) 2 species) from commercial cupric‐ and cuprous‐sulfide powders respectively. The resulting Cu‐poor nanoparticles exhibit a well‐crystallized hexagonal structure, suppressing the formation of harmful CuO/Cu(OH) 2 byproducts. Additionally, the Cu‐poor nanoparticles uniformly cover the perovskite, effectively addressing residual PbI 2 at grain boundaries and constructing a hole‐transport channel at the interface between perovskite and spiro‐OMeTAD [2,2′,7,7′‐tetrakis (N, N‐di‐p‐methoxyphenylamine)‐9,9′‐spirobifluorene]. In contrast, the Cu‐rich nanoparticles exhibit a non‐crystalline structure with excessive CuO/Cu(OH) 2 byproducts. Their aggregation and non‐uniform morphology on the perovskite surface likely result from the charge‐controlled interactions from the big bond polarity in cupric sulfide. Moreover, the presence of excessive CuO/Cu(OH) 2 byproducts increases hydrophilic sites, weakening interfacial defect passivation and compromising device performance. Consequently, perovskite solar cells using copper‐rich CuS interface passivation layers achieved a champion power conversion efficiency (PCE) of over 25% and maintained ≈87% of the initial PCE after 2,300 h of storage in air, outperforming copper‐rich Cu 2 S‐based devices.

Zitieren

APA

Wang, Z., Li, J., Xiang, W., Xiao, S., Wu, R., Ma, L., Lei, H., Fang, G., Liu, Q., & Qin, P. (2025). Copper‐Poor Copper Sulfide Enables High‐Efficiency and Stable Perovskite Solar Cells via Interface Modification. Advanced Functional Materials, 35(8). https://doi.org/10.1002/adfm.202415709

Vancouver

Wang Z, Li J, Xiang W, Xiao S, Wu R, Ma L, et al. Copper‐Poor Copper Sulfide Enables High‐Efficiency and Stable Perovskite Solar Cells via Interface Modification. Advanced Functional Materials. 2025;35(8). doi:10.1002/adfm.202415709

BibTeX
@article{Wang2025,
  author = {Wang, Ziyi and Li, Jiangling and Xiang, Wuchen and Xiao, Shuping and Wu, Rui and Ma, Liang and Lei, Hongwei and Fang, Guojia and Liu, Qingbo and Qin, Pingli},
  title = {Copper‐Poor Copper Sulfide Enables High‐Efficiency and Stable Perovskite Solar Cells via Interface Modification},
  journal = {Advanced Functional Materials},
  year = {2025},
  volume = {35},
  number = {8},
  doi = {10.1002/adfm.202415709}
}
Kostenlos starten →