Multiscale Design of Dual-Gradient Metamaterials Using Gel-Mediated 3D-Printed Graphene Aerogels for Broadband Electromagnetic Absorption
Nano-Micro Letters · 2026-12 · 18 (1)
DOI: 10.1007/s40820-025-02005-7 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nano-Micro Letters, online erschienen am 05.01.2026. Verfasst von Xiong Lv und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Composites Science Innovation (InCSI), School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, People's Rep…. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Three-dimensional (3D)-printed graphene aerogels hold promise for electromagnetic wave absorption (EWA) engineering due to its ultralow density, outstanding electromagnetic dissipation with the flexibility and precision of manufacturing strategies. However, their high conductivity causes severe impedance mismatch, limiting EWA performance. 3D printing requirements also constrain the dielectric properties of printable graphene inks, hindering the integration of high-performance absorbers with advanced manufacturing. This study proposes a polyacrylic acid (PAA) gel-mediated 3D porous graphene oxide (GO) aerogel multiscale regulation strategy. Precise gel content control enables dual-gradient tuning of the rheology (Benefiting direct ink writing (DIW)) and dielectric loss (Enhancing EWA) of GO/PAA composites and reduces aerogel density (6.9 mg cm −3 from 28.2 mg cm −3 ). Thermal reduction decomposes PAA into amorphous carbon nanoparticles anchored on reduced graphene oxide (rGO), enhancing impedance matching and absorption via synergistic 0D/2D interfacial polarization and conductive loss. The optimized rGO/PAA aerogel achieves a minimum reflection loss (RL) of −39.86 dB at 2.5 mm and an effective absorption bandwidth (EAB) of 8.36 GHz (9.64–18 GHz) at 3.2 mm. Combining DIW and this aerogel, we design a metamaterial absorber (MA) with dual material (dielectric loss) and structural gradients. This MA exhibits an ultrawide EAB of 14 GHz (4–18 GHz) with a total thickness of 7.8 mm. This work establishes a coupled design paradigm of “composition-structure-performance,” providing an engineerable solution for developing lightweight, broadband EWA materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute for Composites Science Innovation (InCSI), School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, People's Republic of China.
- Ningbo Innovation Centre, Zhejiang University, Ningbo, 315100, People's Republic of China.
- Institute for Composites Science Innovation (InCSI), School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, People's Republic of China. faxiangqin@zju.edu.cn.
- Zhejiang Key Laboratory of Advanced-Composites and Structures, Hangzhou, 310027, People's Republic of China. faxiangqin@zju.edu.cn.
- Ningbo Innovation Centre, Zhejiang University, Ningbo, 315100, People's Republic of China. faxiangqin@zju.edu.cn.
Zitieren
APA
Lv, X., Li, C., Wang, G., Estevez, D., Yang, J., Chen, Q., & Qin, F. (2026). Multiscale Design of Dual-Gradient Metamaterials Using Gel-Mediated 3D-Printed Graphene Aerogels for Broadband Electromagnetic Absorption. Nano-Micro Letters, 18(1). https://doi.org/10.1007/s40820-025-02005-7
Vancouver
Lv X, Li C, Wang G, Estevez D, Yang J, Chen Q, et al. Multiscale Design of Dual-Gradient Metamaterials Using Gel-Mediated 3D-Printed Graphene Aerogels for Broadband Electromagnetic Absorption. Nano-Micro Letters. 2026;18(1). doi:10.1007/s40820-025-02005-7
BibTeX
@article{Lv2026,
author = {Lv, Xiong and Li, Changfeng and Wang, Ge and Estevez, Diana and Yang, Junjie and Chen, Qian and Qin, Faxiang},
title = {Multiscale Design of Dual-Gradient Metamaterials Using Gel-Mediated 3D-Printed Graphene Aerogels for Broadband Electromagnetic Absorption},
journal = {Nano-Micro Letters},
year = {2026},
volume = {18},
number = {1},
doi = {10.1007/s40820-025-02005-7}
}
EUVIMED