EUVIMEDEUVIMED entdecken
Crossref

3D‐Printed Gradient‐Porous MXene@mRGO@SiO 2 Microspheres/SiC Hybrid Elastomer for Broadband Electromagnetic Wave Absorption

Mingwei Yang, Junrui Tan, Eun-Seong Kim iD, Longfei Tan, Qiong Wu, Guizhi Zhu, Changhui Fu, Nam-Young Kim iD, Xiangling Ren, Xianwei Meng iD

Small Methods · 2026-01 · 10 (1)

DOI: 10.1002/smtd.202501581 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Methods, online erschienen am 03.12.2025. Verfasst von Mingwei Yang und 9 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190,…. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: Beijing Natural Science Foundation, Youth Fund Program of the State Key Laboratory of Cryogenic Science and Technology, National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

3D printing via direct ink writing (DIW) enables the precise fabrication of macroscale architectures for high‐performance electromagnetic wave absorption elastomers (EMWAEs). However, achieving inks that combine excellent printability with superior electromagnetic and mechanical properties remains challenging. Here, a scalable fabrication strategy employing MXene@modified‐RGO@SiO 2 microspheres synthesized through continuous spheroidization is presented. The incorporation of SiO 2 nanoparticles on the microsphere surface preserves the spherical morphology, enhances dispersion within the silicone elastomer matrix, and optimizes rheological behavior for stable DIW extrusion. Guided by electromagnetic simulations, three‐layer gradient‐porous structures is designed and printed that maximize interfacial polarization and multiple scattering effects. The resulting elastomers exhibit a minimum reflection loss (RL min ) of −44 dB and a maximum effective absorption bandwidth of 7.2 GHz at a thickness of only 3 mm. In addition to their outstanding electromagnetic performance, the printed materials demonstrate improved thermal conductivity and tensile strength, offering a multifunctional platform suitable for flexible and wearable electronic devices. This approach provides a simple, effective, and customizable route for integrating advanced fillers into 3D‐printable elastomers, paving the way for next‐generation EMWAEs with tunable architectures, broad bandwidth absorption, and mechanical robustness.

Schlagwörter

Stichwörter der Autor:innen

continuous spheroidizationdirect ink 3D printingelectromagnetic wave absorptiongradient‐porous structuressilicone elastomers

Autor:innen und Institutionen

  • State Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190, P. R. China.
  • University of Chinese Academy of Sciences, Beijing, 100049, P. R. China.
  • RF Bio Center, Department of Electronic Engineering, Kwangwoon University, 20 Kwangwoon-ro, Nowon-gu, Seoul, 01897, South Korea.
  • Laboratory of Molecular Pathology and Cancer Genomics, Department of Molecular Medicine and Biopharmaceutical Sciences, Graduate School of Convergence Science and Technology, Seoul National University, Seoul, 08826, Sou…

ORCID-Profile: Eun-Seong Kim, Nam-Young Kim, Xianwei Meng

Förderung

  • Beijing Natural Science Foundation
  • Youth Fund Program of the State Key Laboratory of Cryogenic Science and Technology
  • National Research Foundation of Korea
  • Natural Science Foundation of Beijing Municipality

Zitieren

APA

Yang, M., Tan, J., Kim, E. S., Tan, L., Wu, Q., Zhu, G., Fu, C., Kim, N. Y., Ren, X., & Meng, X. (2026). 3D‐Printed Gradient‐Porous MXene@mRGO@SiO 2 Microspheres/SiC Hybrid Elastomer for Broadband Electromagnetic Wave Absorption. Small Methods, 10(1). https://doi.org/10.1002/smtd.202501581

Vancouver

Yang M, Tan J, Kim ES, Tan L, Wu Q, Zhu G, et al. 3D‐Printed Gradient‐Porous MXene@mRGO@SiO 2 Microspheres/SiC Hybrid Elastomer for Broadband Electromagnetic Wave Absorption. Small Methods. 2026;10(1). doi:10.1002/smtd.202501581

BibTeX
@article{Yang2026,
  author = {Yang, Mingwei and Tan, Junrui and Kim, Eun-Seong and Tan, Longfei and Wu, Qiong and Zhu, Guizhi and Fu, Changhui and Kim, Nam-Young and Ren, Xiangling and Meng, Xianwei},
  title = {3D‐Printed Gradient‐Porous MXene@mRGO@SiO 2 Microspheres/SiC Hybrid Elastomer for Broadband Electromagnetic Wave Absorption},
  journal = {Small Methods},
  year = {2026},
  volume = {10},
  number = {1},
  doi = {10.1002/smtd.202501581}
}
Kostenlos starten →