EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Environmental drawbacks of lightweight design algorithms in material extrusion additive manufacturing: a case study

Mattia Mele, Gregorio Pisaneschi, Michele Ciotti, Giampaolo Campana, Andrea Zucchelli, Maurizio Fiorini

Journal of the Brazilian Society of Mechanical Sciences and Engineering · 2023-10 · 45 (10)

DOI: 10.1007/s40430-023-04456-8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the Brazilian Society of Mechanical Sciences and Engineering, online erschienen am 21.09.2023. Verfasst von Mattia Mele und 5 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministero dell’Istruzione, dell’Universitá e della Ricerca, Alma Mater Studiorum - Università di Bologna.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lightweight design is often assumed to be the leading strategy to improve the sustainability of parts produced by additive manufacturing. The present study confutes such an assumption by a cradle-to-gate life cycle assessment of different lightweight strategies applied to a specific case study in the medical field. In particular, a patient-specific finger splint made of polyamide is redesigned by means of generative design, topology optimization and lattice structures. The analysis investigates two markedly different deposition processes, namely Arburg plastic freeforming and fused filament fabrication. The former is carried out on an industrial-grade machine, while a desktop printer is used for the latter. This allows for observing the impact of the redesign in two quite distinct scenarios. Findings demonstrate that, since environmental impacts are mainly driven by building time, the adoption of automated design algorithms can be detrimental to the sustainability of the process. On the other hand, relevant benefits on environmental impacts were achieved by reducing the infill percentage of parts. The results of this work highlight the most relevant aspects which must be considered to limit environmental impacts when designing parts for deposition-based additive manufacturing. This information can be used by designers to drive weight reduction towards sustainability.

Förderung

  • Ministero dell’Istruzione, dell’Universitá e della Ricerca
  • Alma Mater Studiorum - Università di Bologna

Zitieren

APA

Mele, M., Pisaneschi, G., Ciotti, M., Campana, G., Zucchelli, A., & Fiorini, M. (2023). Environmental drawbacks of lightweight design algorithms in material extrusion additive manufacturing: a case study. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(10). https://doi.org/10.1007/s40430-023-04456-8

Vancouver

Mele M, Pisaneschi G, Ciotti M, Campana G, Zucchelli A, Fiorini M. Environmental drawbacks of lightweight design algorithms in material extrusion additive manufacturing: a case study. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023;45(10). doi:10.1007/s40430-023-04456-8

BibTeX
@article{Mele2023,
  author = {Mele, Mattia and Pisaneschi, Gregorio and Ciotti, Michele and Campana, Giampaolo and Zucchelli, Andrea and Fiorini, Maurizio},
  title = {Environmental drawbacks of lightweight design algorithms in material extrusion additive manufacturing: a case study},
  journal = {Journal of the Brazilian Society of Mechanical Sciences and Engineering},
  year = {2023},
  volume = {45},
  number = {10},
  doi = {10.1007/s40430-023-04456-8}
}
Kostenlos starten →