EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Functionally Graded Additive Manufacturing: Bridging the Gap between Design and Material Extrusion

Francesco Leoni, Pierandrea Dal Fabbro, Stefano Rosso, Luca Grigolato, Roberto Meneghello, Gianmaria Concheri, Gianpaolo Savio

Applied Sciences · 22.01.2023 · 13 (3) · 1467

DOI: 10.3390/app13031467 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 22.01.2023. Verfasst von Francesco Leoni und 6 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Regional Operational Program F.S.E. 2014–2020 Veneto Region and the European Regional Development Fund POR 2014–2020, Department of Civil, Environmental, and Architectural Engineering, University of Padova.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nowadays, the use of 3D printing is becoming a key process for on-demand and customized manufacturing. One of the most flexible 3D printing techniques is fused deposition modeling (FDM), where the combination of multiple materials was recently introduced. A quantum leap in part design is possible by integrating local variations between materials that allow for expanded functionality to be built into a single part. Therefore, the process of co-extrusion and material mixing is becoming more and more popular. The process of management and design of the engineered part are still complicated, and there are no commercially available tools that follow the process from design to production of these highly engineered products. This paper proposes a methodology to fill this gap and allow any designer to be able to produce multi-material parts by editing a G-code (computer numerical control programming language) with engineered gradients for FDM technology. More specifically, the proposed approach is based on the modification of the G-code according to a volumetric model describing the local combination of two or more materials. This original aspect allows for a wide extension of the current software capabilities. To explain and test the method, a simple test case was investigated, in which two components of an earphone are consolidated and developed gradually by combining polylactic acid and thermoplastic polyurethane. The results show the effectiveness of the proposed approach within the limits of the material coextrusion additive manufacturing process.

Förderung

  • Regional Operational Program F.S.E. 2014–2020 Veneto Region and the European Regional Development Fund POR 2014–2020
  • Department of Civil, Environmental, and Architectural Engineering, University of Padova

Zitieren

APA

Leoni, F., Fabbro, P. D., Rosso, S., Grigolato, L., Meneghello, R., Concheri, G., & Savio, G. (2023). Functionally Graded Additive Manufacturing: Bridging the Gap between Design and Material Extrusion. Applied Sciences, 13(3), 1467. https://doi.org/10.3390/app13031467

Vancouver

Leoni F, Fabbro PD, Rosso S, Grigolato L, Meneghello R, Concheri G, et al. Functionally Graded Additive Manufacturing: Bridging the Gap between Design and Material Extrusion. Applied Sciences. 2023;13(3):1467. doi:10.3390/app13031467

BibTeX
@article{Leoni2023,
  author = {Leoni, Francesco and Fabbro, Pierandrea Dal and Rosso, Stefano and Grigolato, Luca and Meneghello, Roberto and Concheri, Gianmaria and Savio, Gianpaolo},
  title = {Functionally Graded Additive Manufacturing: Bridging the Gap between Design and Material Extrusion},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {3},
  pages = {1467},
  doi = {10.3390/app13031467}
}
Kostenlos starten →