Innovative sulfonated chitosan membranes: bridging the gap in fuel cell technology
Materials for Renewable and Sustainable Energy · 2025-12 · 14 (3)
DOI: 10.1007/s40243-025-00327-5 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials for Renewable and Sustainable Energy, online erschienen am 29.08.2025. Verfasst von Sara G. Abd-elnaeem und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Centre Egypt.
Abstract (Originalsprache)
Chitosan, a natural polymer, is gaining attention for its low cost, hydrophilicity, and environmental benefits, making it a promising material for polyelectrolyte membranes (PEMs) in fuel cells (FCs). In this study, four membranes were fabricated using sulfonated chitosan combined with three sulfonated nanoparticles: sulfonated titanium dioxide (STiO 2 ), sulfonated silicon dioxide (SSiO 2 ), and sulfonated carbon nanotubes (SCNT) in varying ratios. The optimal membrane was prepared using a specific ratio of these components, cross-linked with 0.5% glutaraldehyde. While the electrochemical performance improved with increasing nanoparticle ratios, excessive nanoparticle content led to diminished results. The optimal membrane demonstrated excellent stability at 50 °C, achieving a maximum power density of 90 mW/cm 2 at 280 mA/cm 2 and a low cell resistance of 5.1 Ω cm 2 . Compared to the chitosan (CS)-based membranes in the literature, the optimal membrane exhibited superior ion exchange capacity, proton conductivity, mechanical stability, and lower water uptake, highlighting its potential as a sustainable and high-performance proton exchange membrane in fuel cell applications.
Förderung
- National Research Centre Egypt
Zitieren
APA
Abd-elnaeem, S. G., Hafez, A. I., El-khatib, K. M., Abdallah, H., Fouad, M. K., & Abadir, E. F. (2025). Innovative sulfonated chitosan membranes: bridging the gap in fuel cell technology. Materials for Renewable and Sustainable Energy, 14(3). https://doi.org/10.1007/s40243-025-00327-5
Vancouver
Abd-elnaeem SG, Hafez AI, El-khatib KM, Abdallah H, Fouad MK, Abadir EF. Innovative sulfonated chitosan membranes: bridging the gap in fuel cell technology. Materials for Renewable and Sustainable Energy. 2025;14(3). doi:10.1007/s40243-025-00327-5
BibTeX
@article{Abdelnaeem2025,
author = {Abd-elnaeem, Sara G. and Hafez, Azza I. and El-khatib, Kamel M. and Abdallah, Heba and Fouad, M. K. and Abadir, E. F.},
title = {Innovative sulfonated chitosan membranes: bridging the gap in fuel cell technology},
journal = {Materials for Renewable and Sustainable Energy},
year = {2025},
volume = {14},
number = {3},
doi = {10.1007/s40243-025-00327-5}
}
EUVIMED