EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sulfonated Polyphenylene-Based Multiblock Membranes with Fluorine Moiety for Fuel Cell Applications

Farid Wijaya, Seunghee Woo, Suyeon Kim, Minji Chon, Jonghak Kim, Hyerin Lee, Hansung Kim, Hyejin Lee, Dongwon Shin, Byungchan Bae

International Journal of Energy Research · 19.06.2023 · 2023 · 1-13

DOI: 10.1155/2023/5562126 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Energy Research, erschienen am 19.06.2023. Verfasst von Farid Wijaya und 9 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Energy Technology Evaluation and Planning, Korea Institute of Energy Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sulfonated poly(phenylene-co-arylene ether sulfone) multiblock copolymers are synthesized via Colon’s nickel-mediated cross-coupling reaction and are investigated as a proton-exchange membrane fuel cell. To investigate the influence of the fluorine moieties on the membrane properties, two different membranes are prepared, one containing a fluorinated hydrophobic poly(arylene ether) block (6F polymer membrane) and a nonfluorinated biphenyl (BP) polymer membrane. The proton transport, morphology, mechanical properties, and oxidative stabilities of the membranes are examined in relation to the ion-exchange capacity (IEC). 6F polymer membranes show superior proton conductivity and oxidative stability (results of Fenton’s oxidative stability and hydrogen peroxide exposure tests) compared with the BP polymer membranes. In water at 25°C, 6F and BP polymer membranes with IEC 2.0 meq g–1 exhibit proton conductivity of 0.11 S cm–1 with 6F having 16% lower water uptake than BP polymer. Meanwhile, at 30% RH and 80°C, 6F-X5Y9-(2.0) exhibits proton conductivity of 0.0026 S cm–1 that almost 50% higher than BP-X5Y7-(2.0) with 0.0018 S cm–1, while at 90% RH and 80°C, both polymers have an almost similar value of 0.10 S cm–1. Oxidative stability with the Fenton test under harsh conditions demonstrates that 6F-X5Y9-(2.0) has an extent degradation of 26%, almost 19% lower than BP-X5Y7-(2.0) with 32%, and the hydrogen peroxide exposure test demonstrates that 6F has 50% lower extent of degradation than BP with 5 and 9%, respectively. Fuel cell performance test at 80°C and 100% RH show that 6F-X5Y9-(2.0) exhibits a current density of 1.6 A cm–2 at 0.6 V (hydrogen/air) and outperforms Nafion-NR211 and BP-X5Y7-(2.0), 1.4 A cm–2 and 1.2 A cm–2, respectively. Undoubtedly, incorporating fluorinated moieties could enhance proton transport properties and oxidative stability favorable for fuel cell application.

Förderung

  • Korea Institute of Energy Technology Evaluation and Planning
  • Korea Institute of Energy Research

Zitieren

APA

Wijaya, F., Woo, S., Kim, S., Chon, M., Kim, J., Lee, H., Kim, H., Lee, H., Shin, D., & Bae, B. (2023). Sulfonated Polyphenylene-Based Multiblock Membranes with Fluorine Moiety for Fuel Cell Applications. International Journal of Energy Research, 2023, 1-13. https://doi.org/10.1155/2023/5562126

Vancouver

Wijaya F, Woo S, Kim S, Chon M, Kim J, Lee H, et al. Sulfonated Polyphenylene-Based Multiblock Membranes with Fluorine Moiety for Fuel Cell Applications. International Journal of Energy Research. 2023;2023:1-13. doi:10.1155/2023/5562126

BibTeX
@article{Wijaya2023,
  author = {Wijaya, Farid and Woo, Seunghee and Kim, Suyeon and Chon, Minji and Kim, Jonghak and Lee, Hyerin and Kim, Hansung and Lee, Hyejin and Shin, Dongwon and Bae, Byungchan},
  title = {Sulfonated Polyphenylene-Based Multiblock Membranes with Fluorine Moiety for Fuel Cell Applications},
  journal = {International Journal of Energy Research},
  year = {2023},
  volume = {2023},
  pages = {1--13},
  doi = {10.1155/2023/5562126}
}
Kostenlos starten →