EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bare Metal Stenting for Residual Arch Dissections: A Computational Analysis

Žiga Donik, Sanjeev Dhara iD, Willa Li, Blessing Nnate, Seth Sankary, Kayla Polcari, Mary Alyssa Varsanik, Kameel Khabaz, Ross Milner, Nhung Nguyen, Janez Kramberger, Luka Pocivavsek

Cardiovascular Engineering and Technology · 2025-12 · 16 (6) · 624-640

DOI: 10.1007/s13239-025-00799-6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Cardiovascular Engineering and Technology, online erschienen am 04.08.2025. Verfasst von Žiga Donik und 11 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, University of Maribor, Maribor, Slovenia. Hauptthemen laut MEDLINE: Stents, Aortic Dissection, Aortic Aneurysm, Thoracic, Models, Cardiovascular. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

Type A Thoracic Aortic Dissections are a highly morbid and complex clinical challenge often managed with hemiarch or total arch repair. Hemiarch repair is more commonly performed due to improved neurologic morbidity profile however it leaves behind a residual dissection flap which can lead to aneurysmal degeneration. Bare metal stent placement in conjunction with hemiarch repair is a novel technique which can theoretically avoid leaving a residual dissection flap. In this paper we analyze the biomechanical changes observed after in silico deployment of a bare metal stent in a post-hemiarch type A aortic dissection.

Methods

We obtain computed tomography scans from pre-operative bare metal stent patients and perform high-fidelity segmentations. This geometry is then utilized for in silico stent deployment via finite element analysis. Deformed geometries are then utilized for computational fluid dynamic simulations to analyze the evolution of pressure gradients in the aorta.

Results

We analyze the resulting geometry from in silico stent deployment for three different stiffness ratios between the flap and aortic wall. We demonstrate an acceptable stress evolution in the stent across all 3 stiffness configurations. We show a reduction in the false luminal volume across all stiffness ratios. Our analysis of pressure distributions that evolve in the aorta show that even in scenarios of high flap stiffness, where the false lumen volume shrinks correspondingly less, we still achieve a reduction in the pressure gradient across the aorta.

Conclusion

We show that bare metal stent deployment hemodynamically stabilizes the aorta via our finite element analysis and subsequent computational fluid dynamic modelling.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

StentsAortic DissectionAortic Aneurysm, ThoracicModels, CardiovascularEndovascular ProceduresMetalsBlood Vessel Prosthesis ImplantationAorta, ThoracicBlood Vessel ProsthesisPatient-Specific ModelingHumansFinite Element AnalysisProsthesis DesignHemodynamicsComputed Tomography AngiographyComputer SimulationAortographyTreatment OutcomeStress, Mechanical

Stichwörter der Autor:innen

Bare metal stentComputational fluid dynamicsFinite element analysisType A thoracic aortic dissection

Substanzen

Metals

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering, University of Maribor, Maribor, Slovenia.
  • Section of Vascular Surgery and Endovascular Therapy, Department of Surgery, The University of Chicago, Chicago, IL, USA. Sanjeev.Dhara@bsd.uchicago.edu.
  • Division of Vascular Surgery, Department of Surgery, Emory University, Atlanta, GA, USA. Sanjeev.Dhara@bsd.uchicago.edu.
  • Section of Vascular Surgery and Endovascular Therapy, Department of Surgery, The University of Chicago, Chicago, IL, USA.
  • Section of Vascular Surgery and Endovascular Therapy, Department of Surgery, The University of Chicago, Chicago, IL, USA. lpocivavsek@bsd.uchicago.edu.

ORCID-Profile: Sanjeev Dhara

Zitieren

APA

Donik, Ž., Dhara, S., Li, W., Nnate, B., Sankary, S., Polcari, K., Varsanik, M. A., Khabaz, K., Milner, R., Nguyen, N., Kramberger, J., & Pocivavsek, L. (2025). Bare Metal Stenting for Residual Arch Dissections: A Computational Analysis. Cardiovascular Engineering and Technology, 16(6), 624-640. https://doi.org/10.1007/s13239-025-00799-6

Vancouver

Donik Ž, Dhara S, Li W, Nnate B, Sankary S, Polcari K, et al. Bare Metal Stenting for Residual Arch Dissections: A Computational Analysis. Cardiovascular Engineering and Technology. 2025;16(6):624-640. doi:10.1007/s13239-025-00799-6

BibTeX
@article{Donik2025,
  author = {Donik, Žiga and Dhara, Sanjeev and Li, Willa and Nnate, Blessing and Sankary, Seth and Polcari, Kayla and Varsanik, Mary Alyssa and Khabaz, Kameel and Milner, Ross and Nguyen, Nhung and Kramberger, Janez and Pocivavsek, Luka},
  title = {Bare Metal Stenting for Residual Arch Dissections: A Computational Analysis},
  journal = {Cardiovascular Engineering and Technology},
  year = {2025},
  volume = {16},
  number = {6},
  pages = {624--640},
  doi = {10.1007/s13239-025-00799-6}
}
Kostenlos starten →