Pediatric Cardiovascular Multiscale Modeling using a Functional Mock-up Interface
Cardiovascular Engineering and Technology · 2025-04 · 16 (2) · 202-210
DOI: 10.1007/s13239-024-00767-6 ↗Kurz gefasst
Fachartikel in der Zeitschrift Cardiovascular Engineering and Technology, online erschienen am 06.01.2025. Verfasst von Ellen E Garven und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Biomedical Engineering, Science and Health Systems, Drexel University, 3141 Chestnut Street, Rm. 718, Philadelphia, PA, 19104, USA. eg533@d…. Hauptthemen laut MEDLINE: Models, Cardiovascular, Hemodynamics, Patient-Specific Modeling, Heart Defects, Congenital. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Drexel University.
Abstract (Originalsprache)
Purpose
Computational models of the cardiovascular system continue to increase in complexity. As more elements of the physiology are captured in multiscale models, there is a need to efficiently integrate subsystems. The objective of this study is to demonstrate the effectiveness of a coupling methodology, called functional mock-up interface (FMI), as applied to multiscale cardiovascular modeling.
Methods
The multiscale model is composed of two subsystems: a computational fluid dynamics (CFD) model coupled to a lumped parameter model (LPM). The LPM is packaged using the FMI standard and imported into the CFD subsystem using an FMI co-simulation architecture. The functionality of an FMI coupling was demonstrated in a univentricular parallel circulation by means of compatible tools, including ANSYS CFX and Python. Predicted pressures and flows were evaluated in comparison with clinical data and a previously developed computational model.
Results
The two models exchanged pressure and flow data between their boundaries at each timestep, demonstrating sufficient inter-subsystem communication. The models recreated pressures and flows from clinical measurements and a patient-specific model previously published.
Conclusion
FMI integrated with ANSYS CFX is an effective approach for interfacing cardiovascular multiscale models as demonstrated by the presented univentricular circulatory model. FMI offers a modular approach towards tool integration and is an advantageous strategy for modeling complex systems.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Biomedical Engineering, Science and Health Systems, Drexel University, 3141 Chestnut Street, Rm. 718, Philadelphia, PA, 19104, USA. eg533@drexel.edu.
- Department of Mechanical Engineering, Department of Bioengineering, Clemson University, Clemson, SC, USA.
- St. Christopher's Hospital for Children, Philadelphia, PA, USA.
- Pediatrics, College of Medicine, Drexel University, Philadelphia, PA, USA.
- School of Biomedical Engineering, Science and Health Systems, Drexel University, 3141 Chestnut Street, Rm. 718, Philadelphia, PA, 19104, USA.
ORCID-Profile: Ellen E Garven, Ethan Kung, Randy M Stevens, Amy L Throckmorton
Förderung
- Drexel University
Zitieren
APA
Garven, E. E., Kung, E., Stevens, R. M., & Throckmorton, A. L. (2025). Pediatric Cardiovascular Multiscale Modeling using a Functional Mock-up Interface. Cardiovascular Engineering and Technology, 16(2), 202-210. https://doi.org/10.1007/s13239-024-00767-6
Vancouver
Garven EE, Kung E, Stevens RM, Throckmorton AL. Pediatric Cardiovascular Multiscale Modeling using a Functional Mock-up Interface. Cardiovascular Engineering and Technology. 2025;16(2):202-210. doi:10.1007/s13239-024-00767-6
BibTeX
@article{Garven2025,
author = {Garven, Ellen E and Kung, Ethan and Stevens, Randy M and Throckmorton, Amy L},
title = {Pediatric Cardiovascular Multiscale Modeling using a Functional Mock-up Interface},
journal = {Cardiovascular Engineering and Technology},
year = {2025},
volume = {16},
number = {2},
pages = {202--210},
doi = {10.1007/s13239-024-00767-6}
}
EUVIMED