Nanoindentation and Corrosion Behaviour of 410 Stainless Steel Fabricated Via Additive Manufacturing
Transactions of the Indian Institute of Metals · 2023-03 · 76 (3) · 695-702
DOI: 10.1007/s12666-022-02736-w ↗Kurz gefasst
Fachartikel in der Zeitschrift Transactions of the Indian Institute of Metals, online erschienen am 19.09.2022. Verfasst von Miltia Lesufi und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation South Africa, Aalto University.
Abstract (Originalsprache)
This study investigates the microstructural, nanomechanical, and corrosion behaviour of different sections of 410 steel fabricated via directed energy deposition technique. The morphology exhibited by the longitudinal and transverse sections of the specimens was examined under a scanning electron microscope (SEM), while micro-computed tomography technique (micro-CT) was used for examination of the internal structure of the specimens. Nanomechanical properties were assessed using a nanoindenter, while potentiodynamic polarization technique was adopted to investigate the corrosion resistance of the specimens in a chloride environment. The SEM micrographs revealed minimal pores in the specimens which confirmed the improved density in the layer-by-layer built specimen. Micro-CT images confirmed the presence of tiny pores in the specimens sectioned from the top layer of the 410 stainless steel rod in comparison with the middle- and bottom-sectioned specimens. The corrosion and post-corrosion analyses confirmed that the top specimen exhibits the least corrosion resistance in comparison with the other specimens.
Förderung
- National Research Foundation South Africa
- Aalto University
Zitieren
APA
Lesufi, M., Akinwamide, S. O., Makoana, W., Tshabalala, L., & Olubambi, P. A. (2023). Nanoindentation and Corrosion Behaviour of 410 Stainless Steel Fabricated Via Additive Manufacturing. Transactions of the Indian Institute of Metals, 76(3), 695-702. https://doi.org/10.1007/s12666-022-02736-w
Vancouver
Lesufi M, Akinwamide SO, Makoana W, Tshabalala L, Olubambi PA. Nanoindentation and Corrosion Behaviour of 410 Stainless Steel Fabricated Via Additive Manufacturing. Transactions of the Indian Institute of Metals. 2023;76(3):695-702. doi:10.1007/s12666-022-02736-w
BibTeX
@article{Lesufi2023,
author = {Lesufi, Miltia and Akinwamide, Samuel Olukayode and Makoana, Washington and Tshabalala, Lerato and Olubambi, Peter Apata},
title = {Nanoindentation and Corrosion Behaviour of 410 Stainless Steel Fabricated Via Additive Manufacturing},
journal = {Transactions of the Indian Institute of Metals},
year = {2023},
volume = {76},
number = {3},
pages = {695--702},
doi = {10.1007/s12666-022-02736-w}
}
EUVIMED