EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Concept-based force-signature analysis of tool-parameter effects in fine blanking

Martin Unterberg, Daria Gelbich, Frank Schweinshaupt, Antonia Holzapfel, Daniyal Kazempour, Philipp Niemietz, Peer Kröger, Sebastian Trimpe, Thomas Bergs

Production Engineering · 2026-05 · 20 (2)

DOI: 10.1007/s11740-026-01445-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Production Engineering, online erschienen am 13.05.2026. Verfasst von Martin Unterberg und 8 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: RWTH Aachen University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fine blanking part quality is highly sensitive to tool parameterization, yet cause–effect relationships are obscured by substantial process noise. This limits the utility of both simulation and scalar process metrics for tool optimization and mechanistic understanding. At the same time, high-resolution force-signature data is information-rich and can be used as evidence for learning physically plausible relationships, provided that interpretability is retained. This paper presents a data-to-knowledge pipeline combining finite element method simulation, neural network prediction, and concept extraction to derive interpretable patterns from force time-series and formulate mechanistic hypotheses linking tool parameters to die-roll formation. Controlled tool-parameter variation generates approximately 27,000 strokes with die-roll metrology. Neural networks predict die-roll height and tool parameters with mean absolute percentage errors of 0.6% and 2.6%, respectively. Concept extraction (ECLAD-ts) and segment-aware attribution localize predictive information to peak-load and post-peak regimes. For die-clearance variation, piecewise-linear analysis within concept windows identifies two mechanism-sensitive slope descriptors (Cliff’s $$|\delta | \ge 0.83$$ ) with ordered progressions mirroring the graded die-roll response. The rising-flank slope captures clearance-dependent shearing resistance, while the post-peak decay slope reflects thermo-mechanical softening, reducing flow stress and accelerating the post-peak force decay. Smaller clearance yields higher resistance, faster decay, and reduced die-roll height, consistent with forming theory. The pipeline enables phase-local assessment of tool-parameter effects under process noise and supports testable mechanistic hypotheses for simulation refinement.

Förderung

  • RWTH Aachen University

Zitieren

APA

Unterberg, M., Gelbich, D., Schweinshaupt, F., Holzapfel, A., Kazempour, D., Niemietz, P., Kröger, P., Trimpe, S., & Bergs, T. (2026). Concept-based force-signature analysis of tool-parameter effects in fine blanking. Production Engineering, 20(2). https://doi.org/10.1007/s11740-026-01445-3

Vancouver

Unterberg M, Gelbich D, Schweinshaupt F, Holzapfel A, Kazempour D, Niemietz P, et al. Concept-based force-signature analysis of tool-parameter effects in fine blanking. Production Engineering. 2026;20(2). doi:10.1007/s11740-026-01445-3

BibTeX
@article{Unterberg2026,
  author = {Unterberg, Martin and Gelbich, Daria and Schweinshaupt, Frank and Holzapfel, Antonia and Kazempour, Daniyal and Niemietz, Philipp and Kröger, Peer and Trimpe, Sebastian and Bergs, Thomas},
  title = {Concept-based force-signature analysis of tool-parameter effects in fine blanking},
  journal = {Production Engineering},
  year = {2026},
  volume = {20},
  number = {2},
  doi = {10.1007/s11740-026-01445-3}
}
Kostenlos starten →