Research on the clamping force feedback system of laparoscopic surgery robot
Journal of Robotic Surgery · 2025
DOI: 10.1007/s11701-025-02447-6 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Robotic Surgery, 2025. Verfasst von Zhudong Tong und 2 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University, Changsha, 410083, China. Hauptthemen laut MEDLINE: Laparoscopy, Robotic Surgical Procedures. Die Arbeit nennt 23 Literaturangaben.
Abstract (Originalsprache)
Robot-assisted minimally invasive surgery (MIS) offers several advantages over traditional surgery, including reduced trauma and faster recovery times, leading to its increasingly widespread application. In robot-assisted MIS, the direct contact between surgical instruments and the patient's tissues demands higher precision in movement and enhanced sensing capabilities. This paper focuses on investigating the critical technologies of time delay and gripping force feedback in laparoscopic surgery robot. We propose an actuators-driven surgical robot equipped with gripping force feedback. An experimental system was constructed and control parameters were optimized to achieve ± 180° rotation and 0-60° gripping freedom in primary-secondary control. The experimental measurements indicated that the time delay of the primary-secondary robotic system was maintained at approximately 10 ms. To evaluate the gripping force feedback, three different materials-silicone simulated skin, silicone rubber, and ceramic-were used to simulate human tissue, tumors, and bones, respectively. Sensor measurements of the gripping force feedback revealed that the force required to grip ceramic was twice that needed for gripping the silicone rubber and four times that for gripping the silicone simulated skin. The proposed actuators-driven surgical robot system demonstrates precise primary-secondary synchronous control and accurate gripping force feedback, offering significant potential for the further development of advanced surgical systems.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University, Changsha, 410083, China.
- State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University, Changsha, 410083, China. luozhi@csu.edu.cn.
Zitieren
APA
Tong, Z., Zhang, R., & Luo, Z. (2025). Research on the clamping force feedback system of laparoscopic surgery robot. Journal of Robotic Surgery. https://doi.org/10.1007/s11701-025-02447-6
Vancouver
Tong Z, Zhang R, Luo Z. Research on the clamping force feedback system of laparoscopic surgery robot. Journal of Robotic Surgery. 2025. doi:10.1007/s11701-025-02447-6
BibTeX
@article{Tong2025,
author = {Tong, Zhudong and Zhang, Rong and Luo, Zhi},
title = {Research on the clamping force feedback system of laparoscopic surgery robot},
journal = {Journal of Robotic Surgery},
year = {2025},
doi = {10.1007/s11701-025-02447-6}
}
EUVIMED