EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Computational-Aided Approach for the Optimization of Microfluidic-Based Nanoparticles Manufacturing Process

Marco Bellotti, Enrica Chiesa, Bice Conti, Ida Genta, Michele Conti, Ferdinando Auricchio, Alessandro Caimi

Annals of Biomedical Engineering · 2024

DOI: 10.1007/s10439-024-03590-1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Annals of Biomedical Engineering, 2024. Verfasst von Marco Bellotti und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering and Architecture, Università degli Studi di Pavia, Via Ferrata 3, Pavia, Italy. marco.bellotti01@universitadipavia.it. Hauptthemen laut MEDLINE: Nanoparticles. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Regional Operational Programme of the European Regional Development Fund - POR FESR 2014-2020 program - through the project "DSF (Digital Smart Fluidics): Flui….

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the last few years, the microfluidic production of nanoparticles (NPs) is becoming a promising alternative to conventional industrial approaches (e.g., nanoprecipitation, salting out, and emulsification-diffusion) thanks to the production efficiency, low variability, and high controllability of the production parameters. Nevertheless, the development of new formulations and the switching of the production process toward microfluidic platforms requires expensive and time-consuming number of experiments for the tuning of the formulation to obtain NPs with specific morphological and functional characteristics. In this work, we developed a computational fluid dynamic pipeline, validated through an ad hoc experimental strategy, to reproduce the mixing between the solvent and anti-solvent (i.e., acetonitrile and TRIS–HCl, respectively). Moreover, beyond the classical variables able to describe the mixing performances of the microfluidic chip, novel variables were described in order to assess the region of the NPs formation and the changing of the amplitude of the precipitation region according to different hydraulic conditions. The numerical approach proved to be able to capture a progressive reduction of the nanoprecipitation region due to an increment of the flow rate ratio; in parallel, through the experimental production, a progressive increment of the NPs size heterogeneity was observed with the same fluid dynamic conditions. Hence, the preliminary comparison between numerical and experimental evidence proved the effectiveness of the computational strategy to optimize the NPs manufacturing process. Graphical Abstract

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

NanoparticlesMicrofluidicsMicrofluidic Analytical TechniquesHydrodynamicsComputer Simulation

Stichwörter der Autor:innen

ManufacturingMicrofluidicsNanoparticlesNumerical simulation

Autor:innen und Institutionen

  • Department of Civil Engineering and Architecture, Università degli Studi di Pavia, Via Ferrata 3, Pavia, Italy. marco.bellotti01@universitadipavia.it.
  • Department of Drug Sciences, Università degli Studi di Pavia, V.le Taramelli 12, Pavia, Italy.
  • Department of Civil Engineering and Architecture, Università degli Studi di Pavia, Via Ferrata 3, Pavia, Italy.

Förderung

  • Regional Operational Programme of the European Regional Development Fund - POR FESR 2014-2020 program - through the project "DSF (Digital Smart Fluidics): Flui…

Zitieren

APA

Bellotti, M., Chiesa, E., Conti, B., Genta, I., Conti, M., Auricchio, F., & Caimi, A. (2024). Computational-Aided Approach for the Optimization of Microfluidic-Based Nanoparticles Manufacturing Process. Annals of Biomedical Engineering. https://doi.org/10.1007/s10439-024-03590-1

Vancouver

Bellotti M, Chiesa E, Conti B, Genta I, Conti M, Auricchio F, et al. Computational-Aided Approach for the Optimization of Microfluidic-Based Nanoparticles Manufacturing Process. Annals of Biomedical Engineering. 2024. doi:10.1007/s10439-024-03590-1

BibTeX
@article{Bellotti2024,
  author = {Bellotti, Marco and Chiesa, Enrica and Conti, Bice and Genta, Ida and Conti, Michele and Auricchio, Ferdinando and Caimi, Alessandro},
  title = {Computational-Aided Approach for the Optimization of Microfluidic-Based Nanoparticles Manufacturing Process},
  journal = {Annals of Biomedical Engineering},
  year = {2024},
  doi = {10.1007/s10439-024-03590-1}
}
Kostenlos starten →