Simulation-Based Microfluidic Deformation Mapping for Region-Dependent Apparent Young’s Modulus Estimation of Single Cells
Biosensors · 2026
DOI: 10.3390/bios16090461 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biosensors, 2026. Verfasst von Minhui Liang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Guangxi University, Nanning 530004, China. Hauptthemen laut MEDLINE: Single-Cell Analysis, Elastic Modulus, Microfluidics. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of Guangxi Province, Natural Science Foundation of Guangxi Zhuang 636 Autonomous Region, National Natural Science Foundation of China.
Abstract (Originalsprache)
High-throughput microfluidic deformation assays enable label-free single-cell mechanophenotyping by quantifying how cells deform under controlled hydrodynamic loading. These approaches commonly extract deformation-related observables, such as projected area, axis ratio, and deformation index, and use them as indicators for cellular mechanical properties. However, deformation is not solely determined by stiffness; it is a coupled outcome of cell size, local hydrodynamic stress, and intrinsic mechanical response. Therefore, we present a simulation-based microfluidic framework for estimating region-dependent apparent Young’s modulus (E, a quantitative indicator characterizing cellular mechanical stiffness) from diameter–deformation measurements at the single-cell level. A three-region microfluidic channel is designed to impose distinct hydrodynamic loading conditions, while numerical simulations establish quantitative maps linking cell diameter, deformation, and E. Based on these results, region-specific nonlinear surface models are constructed to invert experimental diameter–deformation measurements into E values. Finally, application to primary T cells and K562 cells demonstrates clear region-dependent differences in E, highlighting the influence of local loading conditions on inferred mechanical properties. Overall, this work provides a simplified but practical route for transforming deformation-based phenotypes into quantitative, loading-aware mechanical parameters for single-cell analysis.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Guangxi University, Nanning 530004, China.
- School of Microelectronics, South China University of Technology, Guangzhou 511442, China.
- The People's Hospital of Guangxi Zhuang Autonomous Region, Guangxi Academy of Medical Sciences, Nanning 530021, China.
ORCID-Profile: Minhui Liang, Jianwei Zhong, Lin Lin
Förderung
- National Natural Science Foundation of Guangxi Province
- Natural Science Foundation of Guangxi Zhuang 636 Autonomous Region
- National Natural Science Foundation of China
- Natural Science Foundation of Guangxi Zhuang Autonomous Region
Zitieren
APA
Liang, M., Zhou, Y., Ming, D., Lyu, J., Zhong, J., Li, H., & Lin, L. (2026). Simulation-Based Microfluidic Deformation Mapping for Region-Dependent Apparent Young’s Modulus Estimation of Single Cells. Biosensors. https://doi.org/10.3390/bios16090461
Vancouver
Liang M, Zhou Y, Ming D, Lyu J, Zhong J, Li H, et al. Simulation-Based Microfluidic Deformation Mapping for Region-Dependent Apparent Young’s Modulus Estimation of Single Cells. Biosensors. 2026. doi:10.3390/bios16090461
BibTeX
@article{Liang2026,
author = {Liang, Minhui and Zhou, Yilong and Ming, Dawei and Lyu, Jiawei and Zhong, Jianwei and Li, Han and Lin, Lin},
title = {Simulation-Based Microfluidic Deformation Mapping for Region-Dependent Apparent Young’s Modulus Estimation of Single Cells},
journal = {Biosensors},
year = {2026},
doi = {10.3390/bios16090461}
}
EUVIMED