EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental and Numerical Studies of Additively Manufactured Metallic Origami-Inspired Metamaterials Under Impact

Jianyu Gao, Minghong Xu, Fan Lin, Xinpei Zhang, Xuhao Huang, Tingfeng Ma

Acta Mechanica Solida Sinica · 30.07.2026

DOI: 10.1007/s10338-026-00809-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Acta Mechanica Solida Sinica, online erschienen am 30.07.2026. Verfasst von Jianyu Gao und 5 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Origami-inspired cellular metamaterials provide a promising strategy for impact protection, as their collapse behaviour can be programmed through cell geometry and topology design. This study investigates the dynamic compressive response of three types of Miura-ori-based cellular metamaterials fabricated from 316L stainless steel by selective laser melting. These three designs include a straight-crease Miura-ori reference geometry, denoted as R, and two curved-crease derivatives, denoted as C and S. Impact experiments were performed using a forward direct impact Hopkinson bar at nominal impact velocities of 24 m/s and 53 m/s, with high-speed imaging used to identify the corresponding collapse mechanisms. Shell-based finite-element models were developed to examine the effects of loading conditions and material strain-rate sensitivity. Four finite element modelling strategies were compared: constant-velocity and initial-velocity loading, each with and without a Johnson–Cook strain-rate-dependent constitutive model. Additional quasi-static and 55 m/s constant-velocity simulations were conducted on specimens of R-cube, C-cube, and S-cube configurations to assess the effective material-level response of these three geometric types. The finite element results show that the dynamic loading condition has little influence on the predicted stress–strain response, whereas strain-rate sensitivity is essential for reproducing the experimentally measured dynamic strengthening. The rate-independent models substantially under-predict the crushing stress, while the rate-dependent models capture both the plateau stress and the main collapse behaviours with good accuracy. The experimental and numerical results also demonstrate that curved-crease design and rate-sensitive material modelling are both critical for optimising and predicting the impact response of additively manufactured origami-inspired metallic metamaterials.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Gao, J., Xu, M., Lin, F., Zhang, X., Huang, X., & Ma, T. (2026). Experimental and Numerical Studies of Additively Manufactured Metallic Origami-Inspired Metamaterials Under Impact. Acta Mechanica Solida Sinica. https://doi.org/10.1007/s10338-026-00809-7

Vancouver

Gao J, Xu M, Lin F, Zhang X, Huang X, Ma T. Experimental and Numerical Studies of Additively Manufactured Metallic Origami-Inspired Metamaterials Under Impact. Acta Mechanica Solida Sinica. 2026. doi:10.1007/s10338-026-00809-7

BibTeX
@article{Gao2026,
  author = {Gao, Jianyu and Xu, Minghong and Lin, Fan and Zhang, Xinpei and Huang, Xuhao and Ma, Tingfeng},
  title = {Experimental and Numerical Studies of Additively Manufactured Metallic Origami-Inspired Metamaterials Under Impact},
  journal = {Acta Mechanica Solida Sinica},
  year = {2026},
  doi = {10.1007/s10338-026-00809-7}
}
Kostenlos starten →