Three-dimensional finite element analysis of the biomechanical properties of different material implants for replacing missing teeth
Odontology · 2025
DOI: 10.1007/s10266-024-00942-0 ↗Kurz gefasst
Fachartikel in der Zeitschrift Odontology, 2025. Verfasst von Yichen Gao und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Oral and Maxillofacial Surgery, The Affiliated Stomatological Hospital of Southwest Medical University, Luzhou, 646000, China. Hauptthemen laut MEDLINE: Finite Element Analysis, Zirconium, Dental Implants, Titanium. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 59 Literaturangaben. Gefördert von: Science and Technology Department of Sichuan Province, Office of Science & Technology and Talent Work of Luzhou, Southwest Medical University.
Abstract (Originalsprache)
The purpose of this study was to analyze the biomechanical properties of implants made of different materials to replace missing teeth by using three-dimensional finite element analysis and provide a theoretic basis for clinical application. CBCT data was imported into the Mimics and 3-Matic to construct the three-dimensional finite element model of a missing tooth restored by an implant. Then, the model was imported into the Marc Mentat. Based on the variations of the implant materials (titanium, titanium-zirconia, zirconia and poly (ether-ether-ketone) (PEEK)) and bone densities (high and low), a total of eight models were created. An axial load of 150 N was applied to the crown of the implant to simulate the actual occlusal situation. Both the maximum values of stresses in the cortical bone and implant were observed in the Zr-low model. The maximum displacements of the implants were also within the normal range except for the PEEK models. The cancellous bone strains were mainly distributed in the apical area of the implant, and the maximum value (3225 μstrain) was found in PEEK-low model. Under the premise of the same implant material, the relevant data from various indices in low-density bone models were larger than that in high-density bone models. From the biomechanical point of view, zirconia, titanium and titanium-zirconia were all acceptable implant materials for replacing missing teeth and possessed excellent mechanical properties, while the application of PEEK material needs to be further optimized and modified.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Oral and Maxillofacial Surgery, The Affiliated Stomatological Hospital of Southwest Medical University, Luzhou, 646000, China.
- Oral & Maxillofacial Reconstruction and Regeneration of Luzhou Key Laboratory, The Affiliated Stomatological Hospital of Southwest Medical University, Luzhou, 646000, China.
- Department of Oral and Maxillofacial Surgery, The Affiliated Stomatological Hospital of Southwest Medical University, Luzhou, 646000, China. heyundaidai@163.com.
- Oral & Maxillofacial Reconstruction and Regeneration of Luzhou Key Laboratory, The Affiliated Stomatological Hospital of Southwest Medical University, Luzhou, 646000, China. heyundaidai@163.com.
Förderung
- Science and Technology Department of Sichuan Province
- Office of Science & Technology and Talent Work of Luzhou
- Southwest Medical University
Zitieren
APA
Gao, Y., He, X., Xu, W., Deng, Y., Xia, Z., Chen, J., & He, Y. (2025). Three-dimensional finite element analysis of the biomechanical properties of different material implants for replacing missing teeth. Odontology. https://doi.org/10.1007/s10266-024-00942-0
Vancouver
Gao Y, He X, Xu W, Deng Y, Xia Z, Chen J, et al. Three-dimensional finite element analysis of the biomechanical properties of different material implants for replacing missing teeth. Odontology. 2025. doi:10.1007/s10266-024-00942-0
BibTeX
@article{Gao2025,
author = {Gao, Yichen and He, Xianyi and Xu, Wei and Deng, Yuyao and Xia, Zhaoxin and Chen, Junliang and He, Yun},
title = {Three-dimensional finite element analysis of the biomechanical properties of different material implants for replacing missing teeth},
journal = {Odontology},
year = {2025},
doi = {10.1007/s10266-024-00942-0}
}
EUVIMED