EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A reduced 3D-0D fluid–structure interaction model of the aortic valve that includes leaflet curvature

Ivan Fumagalli, Luca Dede', Alfio Quarteroni

Biomechanics and Modeling in Mechanobiology · 2025

DOI: 10.1007/s10237-025-01960-9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomechanics and Modeling in Mechanobiology, 2025. Verfasst von Ivan Fumagalli und 2 weiteren Autor:innen. Beteiligte Einrichtung: MOX, Dipartimento di Matematica, Politecnico di Milano, piazza Leonardo da Vinci 32, 20133, Milan, Italy. ivan.fumagalli@polimi.it. Hauptthemen laut MEDLINE: Aortic Valve, Models, Cardiovascular. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 103 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: HORIZON EUROPE European Research Council, Politecnico di Milano.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We introduce an innovative lumped-parameter model of the aortic valve, designed to efficiently simulate the impact of valve dynamics on blood flow. Our reduced model includes the elastic effects associated with the leaflets’ curvature and the stress exchanged with the blood flow. The introduction of a lumped-parameter model based on momentum balance entails an easier calibration of the model parameters: Phenomenological-based models, on the other hand, typically have numerous parameters. This model is coupled to 3D Navier–Stokes equations describing the blood flow, where the moving valve leaflets are immersed in the fluid domain by a resistive method. A stabilized finite element method with a BDF time scheme is adopted for the discretization of the coupled problem, and the computational results show the suitability of the system in representing the leaflet motion, the blood flow in the ascending aorta, and the pressure jump across the leaflets. Both physiological and stenotic configurations are investigated, and we analyze the effects of different treatments for the leaflet velocity on the blood flow.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Aortic ValveModels, CardiovascularHumansFinite Element AnalysisBlood Flow VelocityComputer SimulationStress, MechanicalHemodynamicsBiomechanical PhenomenaAortaHydrodynamics

Stichwörter der Autor:innen

Aortic valve stenosisCardiac valve dynamicsComputational fluid dynamicsLumped-parameter modelReduced fluid–structure interactionResistive immersed implicit surface

Autor:innen und Institutionen

  • MOX, Dipartimento di Matematica, Politecnico di Milano, piazza Leonardo da Vinci 32, 20133, Milan, Italy. ivan.fumagalli@polimi.it.
  • MOX, Dipartimento di Matematica, Politecnico di Milano, piazza Leonardo da Vinci 32, 20133, Milan, Italy.
  • Institute of Mathematics, École Polytechnique Fédérale de Lausanne, Route Cantonale, 1015, Lausanne, Switzerland.

Förderung

  • HORIZON EUROPE European Research Council
  • Politecnico di Milano

Zitieren

APA

Fumagalli, I., Dede', L., & Quarteroni, A. (2025). A reduced 3D-0D fluid–structure interaction model of the aortic valve that includes leaflet curvature. Biomechanics and Modeling in Mechanobiology. https://doi.org/10.1007/s10237-025-01960-9

Vancouver

Fumagalli I, Dede' L, Quarteroni A. A reduced 3D-0D fluid–structure interaction model of the aortic valve that includes leaflet curvature. Biomechanics and Modeling in Mechanobiology. 2025. doi:10.1007/s10237-025-01960-9

BibTeX
@article{Fumagalli2025,
  author = {Fumagalli, Ivan and Dede', Luca and Quarteroni, Alfio},
  title = {A reduced 3D-0D fluid–structure interaction model of the aortic valve that includes leaflet curvature},
  journal = {Biomechanics and Modeling in Mechanobiology},
  year = {2025},
  doi = {10.1007/s10237-025-01960-9}
}
Kostenlos starten →